BPW 200 x 50 brake drum 5 stud 112 pcd. The Number 01.271.11.03.0 may be on the drum, some AL-KO drums are stamped 4016455
Fitted with a 72mm wheel bearing (BPW part number Dac397237). Stub axle size 39mm. Comes with wheel bearing and hub nut.
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
Al-Ko Axle Braked SA 650 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4-6 weeks
Alko B1600-3 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4 weeks
Alko B1600-3 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4-6 weeks
Al-Ko brake cable as per diagram
Alko B1600-0 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle, part number: 1550908 - see diagram
Order will only be made upon receiving signed & confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko S 2504-7 Rask axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
The Mammut mover is optimally suited for mounting under caravans from 2010 that are fitted with an M stamped into the chassis. There is no loss of ground clearance, which can be a big advantage for lots of caravans. A fitted Mammut M-20 only weighs 32 kg. The difference in weight becomes clear when we look at the AL-KO Vario chassis with M, where a mounting plate of 5 kg is needed to fit other movers. You need to add this to the weight of the mover.
The AL-KO Mammut mover is for caravans with less ground clearance and with the new M embossed Vario chassis. Other caravan mover models cause a loss of ground clearance of 5-6 cm (Reich/Truma) up to 9 cm (Go2 and other brands) for caravans with the Vario chassis. By comparison, the AL-KO Mammut mover's ideal suitability for caravans with the Vario M chassis means that this degree of loss of ground clearance, along with the problems associated with having little ground clearance, is avoided.
Al-Ko Axle B1200-5 - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4-6 weeks
Alko B1200-6 Axle, image of axle plate attached for reference
Alko B1600-3 axle, part number: 1388468 - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Lead time approx 4 weeks