Universal rubber bellows/gaiters for trailer and caravan couplings with 5 folds.
60mm diameter, 120mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
These bellows fit most Al-ko 30s, 60s 90s,120s/SR, 250s and 101VB couplings .
35mm draw tube, approx 100mm long, 30mm round opening on the head end, 40mm opening on the other end.
May fit other couplings.
Alko gaiter to suit most Al-ko couplings fitted with a AKS 2004 or AKS 3004 stabiliser.
35mm-60mm draw tube, 80mm long, 35mm round opening on the head end, 55mm opening on the other end.
Rubber Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
35/55mm diameter, 80mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Alko gaiter suit 161S and 251S Alko couplings, All ALKO parts are available please ask.
Rubber Vented bellows with bolt cover for ALKO 161S / 251S couplings
54/49mm diameter, 125mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Coupling damper suitable for ALKO 60/90. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 60/90 (including side spacer). Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 60S/2 , capacity 450kgs - 750kgs for coupling produced 1982 to 2001, All Alko spares available.
Alko coupling damper for 90S/2&3 Alko coupling, capacity 700kgs - 1000kgs for coupling produced after 1985 to current year, . All Alko spares available. See our Classic Caravan section for old and obsolete parts.
1x available
Alko coupling damper for 161S for coupling produced 1985 - 1988 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 161 Short (pre 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 161S, for coupling produced after 1989 to current year, Alko coupling 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x avaialble
Coupling damper suitable for ALKO 161 Long (post 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1985 - 1989 Alko coupling, 1500kgs - 2600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 251 Short. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1990 to current year Alko coupling 1500kgs - 2600kgs capacity.All Alko spares available. See our Classic Caravan section for old and obsolete parts.
Coupling damper suitable for ALKO 251 Long. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
AL-KO 131R Damper (1989 - current year). Couping no: ETI 811124, 750KG TO 1300KG.
Length: 525mm long. Tube width: 50mm.
Al-ko FA3.5 and SV 5.5 coupling damper. 2000KG TO 3500KG.
This damper is 380mm long. The tube across the end is 33mm long. and it has a thread
Al-ko 3000kg profi V cast coupling damper. 1600KG TO 3000KG.
Length: 360mm long, end is 60mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko Profi V 3500kg Damper, 2000KG TO 3500KG.
Length: 430mm long. Tube end: 81mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
