Universal rubber bellows/gaiters for trailer and caravan couplings with 5 folds.
60mm diameter, 120mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
These bellows fit most Al-ko 30s, 60s 90s,120s/SR, 250s and 101VB couplings .
35mm draw tube, approx 100mm long, 30mm round opening on the head end, 40mm opening on the other end.
May fit other couplings.
Alko gaiter to suit most Al-ko couplings fitted with a AKS 2004 or AKS 3004 stabiliser.
35mm-60mm draw tube, 80mm long, 35mm round opening on the head end, 55mm opening on the other end.
Rubber Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
35/55mm diameter, 80mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Alko gaiter suit 161S and 251S Alko couplings, All ALKO parts are available please ask.
Rubber Vented bellows with bolt cover for ALKO 161S / 251S couplings
54/49mm diameter, 125mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Coupling damper suitable for ALKO 60/90. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 60/90 (including side spacer). Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 60S/2 , capacity 450kgs - 750kgs for coupling produced 1982 to 2001, All Alko spares available.
Alko coupling damper for 90S/2&3 Alko coupling, capacity 700kgs - 1000kgs for coupling produced after 1985 to current year, . All Alko spares available. See our Classic Caravan section for old and obsolete parts.
1x available
Alko coupling damper for 161S for coupling produced 1985 - 1988 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 161 Short (pre 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 161S, for coupling produced after 1989 to current year, Alko coupling 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x avaialble
Coupling damper suitable for ALKO 161 Long (post 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1985 - 1989 Alko coupling, 1500kgs - 2600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 251 Short. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1990 to current year Alko coupling 1500kgs - 2600kgs capacity.All Alko spares available. See our Classic Caravan section for old and obsolete parts.
Coupling damper suitable for ALKO 251 Long. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
AL-KO 131R Damper (1989 - current year). Couping no: ETI 811124, 750KG TO 1300KG.
Length: 525mm long. Tube width: 50mm.
Al-ko FA3.5 and SV 5.5 coupling damper. 2000KG TO 3500KG.
This damper is 380mm long. The tube across the end is 33mm long. and it has a thread
Al-ko 3000kg profi V cast coupling damper. 1600KG TO 3000KG.
Length: 360mm long, end is 60mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko Profi V 3500kg Damper, 2000KG TO 3500KG.
Length: 430mm long. Tube end: 81mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko 120S STABILUS damper
Length: 340mm long bolt centre to bolt centre. Bolt holes are 10mm with rubber bushes
Alko 120 S SV SR damper.
Length: 400mm. Tube length: 215mm.
Alko 131R damper from 1985-1992
Length: 350mm. Tube length: 180mm. Hole centres are 325mm apart.
Alko rubber bush for the rear of a 150V or 200V damper.
This fits on the treaded end between two metal washers.
Thickness: 5mm, Centre hole: 10mm, Diamter: 21mm
This damper fits AL-KO 160SR and 200SR couplings
This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
AL-KO 354001 Handbrake assembly AL-KO 90/S3 Couplings
Ratchet action handbrake for older 90/S3 couplings with spring cylinder energy store. Complete with breakaway cable and energy store bracket.
Alko nylon bearing bushes, for 161/s and 251/s coupling, the kit containes 1 - front bearing and 1 - rear bearing.
ALKO coupling damper fits SV 3.5 and FA 3.5 3500kg capacity coupling, complete with extension link.
1x available at reduced price, then price will increase to £199.95
Al-Ko chrome plastic aerodynamic cover
Al-ko AK 161 coupling head ( new generation up to 1600 kg )
Plastic soft grip handle, green indicator for correct coupling on to the vehicle and a visual wear indicator to the side.
This coupling head is for a 50mm ball and a 35mm, 45mm and 50mm ROUND draw tube.
Replaces the 35mm AK160 (with the use of the supplied spacer) and 50mm AK160 which are now obsolete,
Can also be used as a replacement for Knott 45mm (with the use of the supplied spacer) and 50mm pressed steel couplings up to 1600kgs
The bolt holes on the side are 50mm to 55mm apart and the front one is elongated.
1730218
Alko AK270 is a replacement for the AK300 version A coupling head, suits 251S couplings with 50 mm draw tube diameter. The handle consists of a solid metal core with an ergonomically shaped 2K plastic cover (soft touch). During operation, the hand is firmly attached to the handle, the shaped end of the handle serves as a slip guard. Provides protection against scratching and shin protection.
Alko safety breakaway cable with snap hook one end and crimp hook on the other, protective plastic coating, fits all ALKO couplings. It is a LEGAL requirement to have a breakaway cable fitted when towing within the EU
The Alko Soft Dock is a manufactured from a soft and absorbent rubber compound which makes this coupling cover a great asset to shin protection whilst also reducing the risk of scratches to the towing vehicle. Can be used on ALKO coupling heads AK7, AK10/2 and AK252.
Replacement gaiter for Alko AKS 2004 and 3004 stabilisers.
Integral security lock and keys which is suitable for many pressed steel couplings. The lock prevents the coupling handle from being operated. Two keys provided.
Fits all Maypole pressed steel couplings up to 3000kg. Soft dock is easy to fit, push it over the coupling head. Soft rubber finish. Effective protection against dents or scratches to the rear of the tow vehicle.
.jpg "Maypole Universal 750Kg Pressed Steel 50mm Coupling MP80")
Part now obsolete, replace with CSC 1301 which has a supplied spacer.
