Deluxe clamp to suit 34 mm diameter jockey wheels and legs. See More Info.
Euro clamp to suit jockey wheels and legs, this clamp allows removal of jockey wheel or leg without removing clamp. Light duty applications.
Tubular steel trailer support leg 34 mm diameter 450 mm long, zinc plated mild steel, will fit all 34 mm clamps.
Tubular steel trailer support leg 48 mm diameter 450 mm long, zinc plated mild steel, will fit all 48 mm clamps.
Base diameter 80mm.
34mm Lightweight Telescopic Jockey wheel.
This Jockey wheel has a 34mm tube with a 170mm plastic wheel and a rubber tyre.
From the ground to the top of the handle is:
Min 570mm and Max 840mm.
Max nose weight guide is 75kgs.
34mm Lightweight Telescopic Jockey wheel.
This Jockey wheel has a 34mm tube with a 170mm plastic wheel and a rubber tyre.
From the ground to the top of the handle is: Min 570mm and Max 840mm.
Max nose weight guide is 75kgs.
Also comes with:
34MM jockey wheel split clamp
Length 105mm, Height 55mm, Bolt holes M10
Made from pressed steel. Can be used for clamping trailer jockey wheels and propstands.
Pusher emergency release
Bulldog Trailerclamp storage bag has a heavy duty zip fastener, comes in red with Bulldog logo. British made.
Trailer Suspension units 350 kg capacity per pair, solid drop arms, standard stub axle suits CSZ 3000 hub. Price per pair of units.
Trailer Suspension units 500 kg capacity per pair, solid drop arms, standard stub axle suits CSZ 3000 hub. Price per pair of units.
Red plastic wheel with solid rubber tyre, 150 mm diameter, 50 mm wide, 12 mm bore. Suitable for Jockey Wheel CJW 0011.
Black plastic wheel with rubber tyre, 160 mm diameter, 43 mm wide, 20 mm bore. Suitable for Jockey Wheel CJW 0012.
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
Unbraked trailer hub, 4 stud on 4 ins PCD, with taper roller bearings, a very popular good quality hub used by most UK manufacturers.
AL-KO pressed steel coupling for unbraked trailers fits onto 60mm wide draw bar, key lock facility and safety indicator. Key insert lock - CSD 3001.
Budget pressed steel coupling for unbraked trailers fits onto 50mm draw bar Max capacity 750 kg has key lock facility. Key insert lock- CSD 3001.
Bradley cast coupling for unbraked trailers has facility for security lock maximun useable capacity 2600 kg and 100 kg nose weight a robust coupling for heavy duty applications. Secuity lock - LOCKIT CSD 3002
Budget pressed steel coupling for unbraked trailers fits onto 60mm draw bar. Suitable for trailers with a maximum capacity of 750 kg. Has key lock facility. Key insert lock- CSD 3001.
Knott unbraked pressed steel coupling suitable for 60mm wide drawbar with comfort fit handle.
Alko pressed steel 50mm coupling on 60mm box section delta plate to enable coupling to be mounted to an 'A' frame drawbar. Galvanised.
Heavy duty snatch cable, a legal requirment on all unbraked trailers. 400 mm long, with safety snap hook on one end and fixed eye the other, this device is intended to keep the trailer and vehicle together should the hitch become detached from the tow ball.
Number plate screw and cap in yellow for rear number plates. Pack of 2.
Bulldog Trailclamp TC100 is an easily portable compact wheel clamp specially designed for the smaller trailer. Covers all wheel nuts for extra security. Fits 8" trailer wheel with 400 x 8 tyre size. Insurance Approved.