Truma Ultrastore Rapid water tank for Series 4 year of manufacture 05/2014 onwards. Accommodates 1300 watt element with 4 bolt fixing. 10 litre capacity.
Truma Ultrastore B10 water tank for Series 3 year of manufacture up to 2014. Accommodates 450 and 850 watt element with 2 bolt fixing. 10 litre capacity.
Truma Therme TT2 replacement tank kit, comes with 3 O rings and 2 drain valves. This is a new tank and tank jacket, all other parts need to be removed from your existing unit. For a complete new unit see part no. CCG 2137 in Appliances section.
Truma Therme TT2 replacement electric heating element, 230V 300 Watt.
Truma Ultrastore cowl cover removal tool for easy opening without damage.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Truma Ultrastore series 3 heating element, 230 V / 850 W used from 07/03.
Replacement Truma Ultraflow pistol housing complete.
Pistol grip O rings suitable for Ultraflow pistol grip assembly
Replacement O rings for Truma Ultraflow Pistol Housing (CCG 2725). Pack of 2.
Truma Ultraflow blanking plug. Use to prevent insects etc. entering the water system during the winter period and when not in use.
Carver Crystal Mk 2 blanking plug. Use to prevent insects etc. entering the water system during the winter period and when not in use.
Truma hot water outlet fits, C series and Ultrastore water heaters, for use with 12 mm John Guest push in hose fitting.
Truma cold water inlet fits, C series and Ultrastore water heaters, for use with 12 mm John Guest push in hose fitting.
Truma hot water outlet fits C series & Ultrastore, water heaters, for use with 12 mm ID push on hose and clip.
Truma Frost Control current free safety drain valve empties the boiler automatically if there is a risk of frost (at around 3 degrees C) and in the event of excess pressure via a charge nozzle. Only once the ambient temperature has risen to a level where frost is no longer a risk (around 7 degrees C) can the valve be closed by hand and the boiler filled again. Suitable for: Electric boiler, Gas / electric boiler. Push On Barbed Fitting shown. Please see More Info for JG fitting. Select Below.
Lid for Truma Ultraflow Housing (CCG 2723). Colour White.
Lid for Truma Ultraflow Compact housing (CCG 2721) .
Replacement twin water hose for Carver / Truma submersible water pump assemblies. Colour blue.
Tool for the easy removal of the Carver Crystal Mk 2 water filter.
Replacement cap and sealing ring for Truma Ultraflow filter. Colour Blue.
Truma Ultraflow pump assembly with ergonomically shaped pistol grip is plugged into the filter or compact housing. 800mm hose. For inlet socket see Part No. CCG 2721 or CCG 2722.
