RED SHOCK ABSORBER A3-70-42
Replaces part number: 1217210. Bolt hole diameter: 16mm. Minimum: 265mm, Maximum: 305mm
RED SHOCK ABSORBER A3-70-42
Replaces part number: 1217210. Bolt hole diameter: 16mm. Minimum: 265mm, Maximum: 305mm
SHOCK ABSORBER A2
SHOCK ABSORBER A2-110-20/120
BPW red shock absorber Part no. 1215590 / 1420225 / 02.372.26.800.
Single axle up to 1050kg, tandem axle up to 2100g
SHOCK ABSORBER A2
BPW blue shock absorber Part numbers 05.803.00.61.0 / 02.3722.66.00. Damping shock absorber for SWING rubber spring axles. Number printed on absorber D 02 3722 66 00. Single Axle : 1050 kg Tandem Axle: Up to 1350KG. Length 237-337mm
SHOCK ABSORBER A2
BPW blue shock absorber Part numbers 05.803.00.61.0 / 02.3722.66.00. Damping shock absorber for SWING rubber spring axles. Number printed on absorber D 02 3722 66 00. Single Axle : 1050 kg Tandem Axle: Up to 1350KG. Length 237-337mm
SHOCK ABSORBER
Al-Ko octagon PLUS reinforced shock absorber, sold singularly.
Some mechanicla components that can be destroyed if overloaded are reinforced. Stroke & length dimensions, and damping forces have not been change.
All parts in images are available, please contact us for more information.
AL-KO 150V Euro Damper. Numbers on the damper are 690391 and 690389. This damper is 530mm long to the end of the thread. The thread is 40mm long.
SHOCK ABSORBER HUB=90 PAV_SR1,35 MX1
Fits PAV-SR 1,3 BX-PX ( COUPLING PART NUMBER 48.27X81.XXX ), ZAF 1.6-1 ( ZAF1.6-1(COUPLING PART NUMBER 48.27.58X.XXX)
DAMPER NUMBER 02.3722.29.01, M P N 02.3722.29.01, FOR HITCH NO. 48.29.581.004, 48.25.581.046.
One end has round tube 30 mm long with a 12 mm hole.
B P W Damper 02.3722.27.01 for B P W couplings 1300 kg
BPW Damper 02.3722.25.01, measurement between hole centre: 340mm. 180mm long body, overall length: 350mm. Fits 2000kg couplings.
BPW overrun damper BPW ZAF 3.5-1 damper code/BPW item no. 02.3702.65.00
- Length center of eye to center of eye: 380 mm. Coupling side: Bush 42 mm long. Hole Ø12 mm, Rear overrun brake side: Bus 42 mm long. Ø14 mm Other numbers: 0237026501 / 02.3702.65.01 / 02 3702 65 01
Damper for 120S.
Has the number 207.755.04 / 207.821.04 on it. This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
The Mammut mover is optimally suited for mounting under caravans from 2010 that are fitted with an M stamped into the chassis. There is no loss of ground clearance, which can be a big advantage for lots of caravans. A fitted Mammut M-20 only weighs 32 kg. The difference in weight becomes clear when we look at the AL-KO Vario chassis with M, where a mounting plate of 5 kg is needed to fit other movers. You need to add this to the weight of the mover.
The AL-KO Mammut mover is for caravans with less ground clearance and with the new M embossed Vario chassis. Other caravan mover models cause a loss of ground clearance of 5-6 cm (Reich/Truma) up to 9 cm (Go2 and other brands) for caravans with the Vario chassis. By comparison, the AL-KO Mammut mover's ideal suitability for caravans with the Vario M chassis means that this degree of loss of ground clearance, along with the problems associated with having little ground clearance, is avoided.
This listing includes both of the below (part numbers 16 and 39 from diagram):
1540140: BRACKET RH OVERRUN DEVICE 200V ZN12A
1351209: BRACKET LH WELD OD130/150/200 V
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1600-0 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1600-3 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4 weeks
Al-Ko Axle Braked SA 650 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 6 weeks
Special order bundle of three pairs of Al-Ko corner steady legs 205713 & 205714
3x 205713
3x 205714
Direct shipped from Al-Ko with a typical lead time of 2 weeks, but can be up to 4 weeks.
