AL-KO 131R Damper (1989 - current year). Couping no: ETI 811124, 750KG TO 1300KG.
Length: 525mm long. Tube width: 50mm.
Al-ko FA3.5 and SV 5.5 coupling damper. 2000KG TO 3500KG.
This damper is 380mm long. The tube across the end is 33mm long. and it has a thread
Al-ko 3000kg profi V cast coupling damper. 1600KG TO 3000KG.
Length: 360mm long, end is 60mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko Profi V 3500kg Damper, 2000KG TO 3500KG.
Length: 430mm long. Tube end: 81mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko 120S STABILUS damper
Length: 340mm long bolt centre to bolt centre. Bolt holes are 10mm with rubber bushes
Alko 120 S SV SR damper.
Length: 400mm. Tube length: 215mm.
Alko 131R damper from 1985-1992
Length: 350mm. Tube length: 180mm. Hole centres are 325mm apart.
Alko rubber bush for the rear of a 150V or 200V damper.
This fits on the treaded end between two metal washers.
Thickness: 5mm, Centre hole: 10mm, Diamter: 21mm
This damper fits AL-KO 160SR and 200SR couplings
This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
AL-KO 354001 Handbrake assembly AL-KO 90/S3 Couplings
Ratchet action handbrake for older 90/S3 couplings with spring cylinder energy store. Complete with breakaway cable and energy store bracket.
Alko nylon bearing bushes, for 161/s and 251/s coupling, the kit containes 1 - front bearing and 1 - rear bearing.
ALKO coupling damper fits SV 3.5 and FA 3.5 3500kg capacity coupling, complete with extension link.
1x available at reduced price, then price will increase to £199.95
ALKO coupling damper fits SV 3.5 and FA 3.5 3500kg capacity coupling, complete with extension link.
1x available at reduced price, then price will increase to £199.95
Al-Ko chrome plastic aerodynamic cover
Alko AK270 is a replacement for the AK300 version A coupling head, suits 251S couplings with 50 mm draw tube diameter. The handle consists of a solid metal core with an ergonomically shaped 2K plastic cover (soft touch). During operation, the hand is firmly attached to the handle, the shaped end of the handle serves as a slip guard. Provides protection against scratching and shin protection.
Alko safety breakaway cable with snap hook one end and crimp hook on the other, protective plastic coating, fits all ALKO couplings. It is a LEGAL requirement to have a breakaway cable fitted when towing within the EU
The Alko Soft Dock is a manufactured from a soft and absorbent rubber compound which makes this coupling cover a great asset to shin protection whilst also reducing the risk of scratches to the towing vehicle. Can be used on ALKO coupling heads AK7, AK10/2 and AK252.
The Alko Soft Dock is a manufactured from a soft and absorbent rubber compound which makes this coupling cover a great asset to shin protection whilst also reducing the risk of scratches to the towing vehicle. Can be used on ALKO coupling heads AK7, AK10/2 and AK252.
Pusher emergency release
Pusher emergency release
Alko insert lock, fits Alko AK7, AK9 and Alko AK10/2 couplings. Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys
ALKO Replacement integral lock for all alko hitch locks, including Type1 ET1. Easy to replace, and come with fitting screws and 2 keys. Fits the popular 811202 security device. Our Part Nos CSD 3012 and CSD 3013.
Integral lock for the Alko AKS 1300 Stabiliser. Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys.
Suitable for AK 30, 65 and AKS2000 , 2500 , 2700 stabiliser.
Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys.
This sturdy Alko Premium security device meets the highest international safety standards such as the criteria for the "Sold Secure Gold Standard" (UK). Fits AKS1300 stabilisers. The sturdy steel construction with powder-coated housing and a solid galvanised bolt (free of chromium (VI)) is supplied with 2 keys. See More Info.
This sturdy Alko Premium security device meets the highest international safety standards such as the criteria for the "Sold Secure Gold Standard" (UK). Fits AKS1300 stabilisers. The sturdy steel construction with powder-coated housing and a solid galvanised bolt (free of chromium (VI)) is supplied with 2 keys. See More Info.
Alko AKS 2700 security device fits Alko AKS 2000, AKS 2500 and AKS 2700 Stabilisers. It provides a substantial deterrent against the theft of the caravan and the stabiliser. Designed to lock over the coupling handle, and enabling the stabiliser handle to be lowered, the hitch lock can remain on your vehicle even when towing. When not coupled up, insert the safety ball within the coupling head before applying the hitch lock to prevent the caravan from being coupled to another vehicle. See More Info.
Alko compact and sturdy universal 50mm towball coupling lock. This ALKO coupling lock most standard ALKO coupling heads, braked and unbraked.
The Alko safe is Designed for use in caravans & motorhomes and can be hidden under a bedbox or fixed into a wardrobe. With a double sided key and solid steel walls, you can relax knowing your valuables are secure.
ALKO replacement 20 mm leg nut, fits CSL 0173 / 4 / 5 leg shown above, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering. Many more Alko spares available.
ALKO replacement leg nut 16 mm, fits older type legs, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering.
ALKO caravan corner steady, with swivel foot, secured by 3 bolts, fully galvanised. 205.712. See More Info.
Note:(this is not a spigot type leg)
ALKO corner mounted support leg, these legs are available as left hand or right hand, complete with swivel foot 75x130mm, fully galvanised. 205.713 L/H and 205.714 R/H. See More Info.
Left hand shown. 5% discount if a pair is chosen.
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
ALKO Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 40mm. See More Info. for sizes. Many more Alko spares available. 205.808
ALKO Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 65mm. 205.817. See More Info. for sizes.
Can be replaced with CSL 0176 for front fitment, only suitable for rear fitment id the length of the spindle is 605mm or longer.
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. See More Info. for sizes. Spigot length 50 mm. 267.265
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with LONG spigot mount into tube on chassis, fully galvanised. See More Info. for sizes. These legs were used for a short period and have a spigot length of 85mm. 1211329.
Typically used on Lunar Caravans and Motorhomes,
ALKO Stabliform Caravan corner steady leg, 2 bolt fixing with 40 mm spigot mount into tube on chassis, fully galvanised. This corner steady is the replacement leg for the now obsolete 267 342 leg often fitted to Bailey, Tabbert and Hobby caravans manufactured in Germany. 20582110. See More Info.
ALKO Premium heavy duty corner steady, these are reinforced to support 1250 kg, used on heavier trailers and caravans.
This model is pre punched to receive anti theft device 1222515
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, zinc plated mild steel - 205675
ALKO leg brace, 665mm overall length, for raising and lowering corner steadies, with rotating knob and hand grip, fits all legs with 19 mm AF head. Many more Alko spares available.
Pivoting steady leg, can be set in 6 different positions from horizontal to vertical to horizontal. Has a load capacity of 500kg, swivel foot pad and is operated by a standard 19mm leg brace. Ideal when a leg needs to be tucked out of the way when not in use. Has a flat mounting bracket with 2 x 10mm holes.
Pivoting steady leg, can be set in 6 different positions from horizontal to vertical to horizontal. Has a load capacity of 500kg, swivel foot pad and is operated by a standard 19mm leg brace. Ideal when a leg needs to be tucked out of the way when not in use. Has a flat mounting bracket with 2 x 10mm holes.
Pair of replacement handles for Alko steady legs 1224068 and 1224069.
Alko Big Foot with its large,re-inforced landing area prevents the steady legs from sliding away or sinking and provides a firm, safe base for the caravan. The support foot has a maximum load bearing capacity of 1250 Kg. A slot ensures that on progressive contact with the ground, the Alko Big Foot functions independently by adapting to the lie of the land. During driving the Alko Big Foot locks against the corner steady by means of a retaining spring. It may be fitted to Standard stable-form and Premium Alko corner steadies from 2001 onwards. Earlier models need modification - details enclosed in operating instructions. Pack of 4.
Alko Big Foot with its large,re-inforced landing area prevents the steady legs from sliding away or sinking and provides a firm, safe base for the caravan. The support foot has a maximum load bearing capacity of 1250 Kg. A slot ensures that on progressive contact with the ground, the Alko Big Foot functions independently by adapting to the lie of the land. During driving the Alko Big Foot locks against the corner steady by means of a retaining spring. It may be fitted to Standard stable-form and Premium Alko corner steadies from 2001 onwards. Earlier models need modification - details enclosed in operating instructions. Pack of 4.
Alko Big Foot adapter enables the Alko Big Foot to get 45mm closer to the ground.
Alko Big Foot adapter enables the Alko Big Foot to get 45mm closer to the ground.
The ALKO side lift jack has been developed to meet the needs of the caravanner and is specially designed for use with the Alko caravan chassis. It can be fitted to all caravans manufactured after 1980, with a maximum total weight up to 1600kg. The jack is easy to position and operate and is supplied with mounting brackets which are bolted to the main chassis members immediately behind wheel. The jack can also be used as an aid to levelling. Can be lowered to 85mm and raised to 375mm. The mounting bracket design ensures correct positioning and operation. Complete with storage bag.
WARNING: When in use the caravan must be attached to the towing vehicle.
Maximum Gross Weight 1600kg
Load Bearing Capacity 800kg
The ALKO side lift jack has been developed to meet the needs of the caravanner and is specially designed for use with the Alko caravan chassis. It can be fitted to all caravans manufactured after 1980, with a maximum total weight up to 1600kg. The jack is easy to position and operate and is supplied with mounting brackets which are bolted to the main chassis members immediately behind wheel. The jack can also be used as an aid to levelling. Can be lowered to 85mm and raised to 375mm. The mounting bracket design ensures correct positioning and operation. Complete with storage bag.
WARNING: When in use the caravan must be attached to the towing vehicle.
Maximum Gross Weight 1600kg
Load Bearing Capacity 800kg
The ALKO side lift jack has been developed to meet the needs of the caravanner and is specially designed for use with the Alko caravan chassis. It can be fitted to all caravans manufactured after 1980, with a maximum total weight up to 2000kg. The jack is easy to position and operate and is supplied with mounting brackets which are bolted to the main chassis members immediately behind wheel. The jack can also be used as an aid to levelling. Can be lowered to 85mm and raised to 375mm. The mounting bracket design ensures correct positioning and operation. Complete with rigid storage case.
WARNING: When in use the caravan must be attached to the towing vehicle.
Maximum Gross Weight 2000kg
Load Bearing Capacity 1000kg
The ALKO side lift jack has been developed to meet the needs of the caravanner and is specially designed for use with the Alko caravan chassis. It can be fitted to all caravans manufactured after 1980, with a maximum total weight up to 1600kg. The jack is easy to position and operate by using with mounting brackets which are bolted to the main chassis members immediately behind wheel. The jack can also be used as an aid to levelling. Can be lowered to 85mm and raised to 375mm. The mounting bracket design ensures correct positioning and operation. Complete with rigid storage case.
WARNING: When in use the caravan must be attached to the towing vehicle.
Maximum Gross Weight 1600kg
Load Bearing Capacity 800kg
ALKO Corner steady security locks. These locks prevent the leg from being operated. This kit enables 2 legs to be locked. This lock kit only fits the ALKO Premium legs, our part: CSL 01762 ALKO Premium Corner Steady H/D
ALKO Corner steady security locks. These locks prevent the leg from being operated. This kit enables 2 legs to be locked. This lock kit only fits the ALKO Premium legs, our part: CSL 01762 ALKO Premium Corner Steady H/D
ALKO Mk 2 AKS 3004 stabiliser effectively suppresses any snaking movements of the caravan by the use of 4 special friction pads which surround the towball. Special ALKO tow ball must be used to allow full articulation without fouling rear of vehicle. Improves towing stability and provides excellent ride comfort with optimum road safety. Maximum capacity 3000 kgs. Special tow ball part no CTB 3311. Trade/Unboxed. For Fixing Kit see Part No. CST 20131.
Fixing kit for Alko AKS 3004 Stabiliser head. For use with Part No. CST 2013.
ALKO Mk 2 AKS 3004 Triple Pack stabiliser pack effectively suppresses any snaking movements of the caravan by the use of 4 special friction pads which surround the towball. Special ALKO tow ball (included) must be used to allow full articulation without fouling rear of vehicle. Improves towing stability and provides excellent ride comfort with optimum road safety.
Alko AKS1300 series stabiliser replacement side friction pad kit.
Alko AKS2000 series stabiliser replacement side friction pads for models up to 1993.
Alko AKS2000 / 2500 / 2700 / 2004 / 3004 series stabiliser replacement side friction pads for models 1994 onwards.
Alko AKS2004 stabiliser replacement front and rear friction pads. Kit consists of 1 - front pad and 1 - rear pad, plus screws.
Alko AKS3004 stabiliser replacement front and rear friction pads. Kit conists of 1 - front pad and 1 - rear pad, plus screws.
Replacement gaiter for Alko AKS 2004 and 3004 stabilisers.
Replacement gaiter for Alko AKS 2004 and 3004 stabilisers.
Alko AKS3004 Stabiliser replacement handle.
Alko soft wheel, standard duty with 5 segments, solid rubber tyre and plastic centre, 215 mm diameter, 65 mm wide, 20mm bore. Note this is not a replacement for the new style 5 segment wheel, please check dimensions carefully. The new style wheel is not available separately. See More Info.
Alko soft wheel, heavy duty with 3 segments, rubber tyre and plastic centre, 240 mm diameter, 70 mm wide.
This is a original equipment replacement wheel for the ALKO H/D jockey wheel assembly with nose load indicator. See More Info.
AL-KO extended 50mm tow ball kit, essential when using any AL-KO stabilisers, fully type approved.
Do not be fooled by cheaper copies.AL-KO extended 50mm tow ball kit, essential when using any AL-KO stabilisers, fully type approved.
Do not be fooled by cheaper copies.Genuine AL-KO ball cover, specially designed to fit the AL-KO extended tow ball.
Genuine AL-KO ball cover, specially designed to fit the AL-KO extended tow ball.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Blue.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Blue.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Black.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Black.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Red.
Genuine AL-KO safety ball cover, a thick soft rubber cap which protects the user from the ball. Colour Red.
AL-KO Safety Ball fits inside coupling mechanism of ALKO stabilisers to prevent contamination of friction pads and used in other couplings to aid in preventing unauthorised towing away of your caravan or trailer, when used with a locking device.
AL-KO Safety Ball fits inside coupling mechanism of ALKO stabilisers to prevent contamination of friction pads and used in other couplings to aid in preventing unauthorised towing away of your caravan or trailer, when used with a locking device.
AL-KO Safety Ball fits inside coupling mechanism of ALKO stabilisers to prevent contamination of friction pads and used in other couplings to aid in preventing unauthorised towing away of your caravan or trailer, when used with a locking device.
AL-KO Safety Ball fits inside coupling mechanism of ALKO stabilisers to prevent contamination of friction pads and used in other couplings to aid in preventing unauthorised towing away of your caravan or trailer, when used with a locking device.
AL-KO pressed steel coupling for unbraked trailers fits onto 50 mm wide draw bar, key lock facility and safety indicator Key insert lock - CSD 3001.
AL-KO pressed steel coupling for unbraked trailers fits onto 50 mm wide draw bar, key lock facility and safety indicator Key insert lock - CSD 3001.
AL-KO pressed steel coupling for unbraked trailers fits onto 60mm wide draw bar, key lock facility and safety indicator. Key insert lock - CSD 3001.
AL-KO pressed steel coupling for unbraked trailers fits onto 60mm wide draw bar, key lock facility and safety indicator. Key insert lock - CSD 3001.
Alko pressed steel 50mm coupling on 60mm box section delta plate to enable coupling to be mounted to an 'A' frame drawbar. Galvanised.
Alko pressed steel 50mm coupling on 60mm box section delta plate to enable coupling to be mounted to an 'A' frame drawbar. Galvanised.
AL-KO wheel bolt M10, used on 160 mm dia drum 4 x 4 ins PCD and unbraked hubs.
AL-KO wheel bolt M12, used extensively on most AL-KO axles and imported trailers. See More Info.
AL-KO wheel bolt M12 with spherical wheel location. See More Info.
AL-KO wheel bolt M14 with spherical wheel location. See More Info.
AL-KO spare wheel carrier, suits ALKO chassis that are 1050mm to 1250mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
AL-KO spare wheel carrier, suits ALKO chassis that are 1260mm to 1515mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
AL-KO spare wheel carrier, suits ALKO chassis that are 1510mm to 1815mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
Al-Ko detachable bowden/brake cable with mushroom/nipple on one end.
The outer cable has a 26/27mm bell on the brake end that fits over the brake sheel on the backplate.
The inner cable has a quick release nipple on end end and a crimped dome on the other.
Special order bundle of three pairs of Al-Ko corner steady legs 205713 & 205714
3x 205713
3x 205714
Direct shipped from Al-Ko with a typical lead time of 2 weeks, but can be up to 4 weeks.
Al-Ko Axle Braked SA 650 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 6 weeks
Alko B1600-3 axle - see diagram
An online order is required with signed copy of diagram sent via email in order to proceed with a purchase. This is a non-returnable item so please check measurements on diagram are correct before signing.
Lead time approx 4 weeks
Alko B1600-0 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Alko B1300-3 axle - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
This listing includes both of the below (part numbers 16 and 39 from diagram):
1540140: BRACKET RH OVERRUN DEVICE 200V ZN12A
1351209: BRACKET LH WELD OD130/150/200 V
The Mammut mover is optimally suited for mounting under caravans from 2010 that are fitted with an M stamped into the chassis. There is no loss of ground clearance, which can be a big advantage for lots of caravans. A fitted Mammut M-20 only weighs 32 kg. The difference in weight becomes clear when we look at the AL-KO Vario chassis with M, where a mounting plate of 5 kg is needed to fit other movers. You need to add this to the weight of the mover.
The AL-KO Mammut mover is for caravans with less ground clearance and with the new M embossed Vario chassis. Other caravan mover models cause a loss of ground clearance of 5-6 cm (Reich/Truma) up to 9 cm (Go2 and other brands) for caravans with the Vario chassis. By comparison, the AL-KO Mammut mover's ideal suitability for caravans with the Vario M chassis means that this degree of loss of ground clearance, along with the problems associated with having little ground clearance, is avoided.
Damper for 120S.
Has the number 207.755.04 / 207.821.04 on it. This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
BPW overrun damper BPW ZAF 3.5-1 damper code/BPW item no. 02.3702.65.00
- Length center of eye to center of eye: 380 mm. Coupling side: Bush 42 mm long. Hole Ø12 mm, Rear overrun brake side: Bus 42 mm long. Ø14 mm Other numbers: 0237026501 / 02.3702.65.01 / 02 3702 65 01
BPW Damper 02.3722.25.01, measurement between hole centre: 340mm. 180mm long body, overall length: 350mm. Fits 2000kg couplings.
B P W Damper 02.3722.27.01 for B P W couplings 1300 kg
SHOCK ABSORBER HUB=90 PAV_SR1,35 MX1
Fits PAV-SR 1,3 BX-PX ( COUPLING PART NUMBER 48.27X81.XXX ), ZAF 1.6-1 ( ZAF1.6-1(COUPLING PART NUMBER 48.27.58X.XXX)
DAMPER NUMBER 02.3722.29.01, M P N 02.3722.29.01, FOR HITCH NO. 48.29.581.004, 48.25.581.046.
One end has round tube 30 mm long with a 12 mm hole.
AL-KO 150V Euro Damper. Numbers on the damper are 690391 and 690389. This damper is 530mm long to the end of the thread. The thread is 40mm long.
Al-Ko octagon PLUS reinforced shock absorber, sold singularly.
Some mechanicla components that can be destroyed if overloaded are reinforced. Stroke & length dimensions, and damping forces have not been change.
All parts in images are available, please contact us for more information.
SHOCK ABSORBER
SHOCK ABSORBER A2
BPW blue shock absorber Part numbers 05.803.00.61.0 / 02.3722.66.00. Damping shock absorber for SWING rubber spring axles. Number printed on absorber D 02 3722 66 00. Single Axle : 1050 kg Tandem Axle: Up to 1350KG. Length 237-337mm
SHOCK ABSORBER A2
BPW blue shock absorber Part numbers 05.803.00.61.0 / 02.3722.66.00. Damping shock absorber for SWING rubber spring axles. Number printed on absorber D 02 3722 66 00. Single Axle : 1050 kg Tandem Axle: Up to 1350KG. Length 237-337mm
SHOCK ABSORBER A2-110-20/120
BPW red shock absorber Part no. 1215590 / 1420225 / 02.372.26.800.
Single axle up to 1050kg, tandem axle up to 2100g
SHOCK ABSORBER A2
RED SHOCK ABSORBER A3-70-42
Replaces part number: 1217210. Bolt hole diameter: 16mm. Minimum: 265mm, Maximum: 305mm
RED SHOCK ABSORBER A3-70-42
Replaces part number: 1217210. Bolt hole diameter: 16mm. Minimum: 265mm, Maximum: 305mm
RED SHOCK ABSORBER A3-70-42
Wheel shock absorber for caravan eye 16mm, length inserted 285mm, length extended 325mm.
SHOCK ABSORBER A3-90-42
SHOCK ABSORBER 549 A RTN
SHOCK ABSORBER A2 S26X100
Single axle up to 1350kg, tandem axle up to 2700kg
SHOCK ABSORBER K2.
This shock absorber is designed specifically for the Standard and Compact Al-Ko axle ranges.
SHOCK ABSORBER K2.
This shock absorber is designed specifically for the Standard and Compact Al-Ko axle ranges.
SHOCK ABSORBER A2-130-60/220
AC SHOCK ABSORBER AK 2008
SHOCK ABSORBER
BPW SHOCK ABSORBER ZAA 0,7-1.1
AC SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER PAV/SR 2,7
SHOCK ABSORBER ZAV 3,5 1A
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER HUB=200 530,5 LG 1500N
SHOCK ABSORBER HUB=200 530,5 LG 1500N
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER ZAF1,0
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER ZAF 1,5-2
SHOCK ABSORBER ZAF 2,0-2
SHOCK ABSORBER ZAV 2,3-3.1
SHOCK ABSORBER
SHOCK ABSORBER
BPW SHOCK ABSORBER ZRV20
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
ET-SET SQ-AXLE SHOCK ABSORBER 1350-1800
ASSEMBLY KIT SHOCK ABSORBER RED 1050 KG
KIT-SHOCK ABSORBER A2-110-20/161-1350KG
KIT-SHOCK ABSORBER A2-110-45/200-1800KG
KIT-SHOCK ABSORBER 1350-1500KG
KIT-SHOCK ABSORBER 1350-1500KG HOLDER
SHOCK ABSORBER
Alko B1600-3 axle, part number: 1388468 - see diagram
Order will only be made upon receiving confirmed diagram via email
(image of axle plate is required unless part number is known)
Lead time approx 4 weeks
AL-KO 350 mm detachable brake cable, with crimped dome on one end, nipple and shroud cup on the other. See More Info.
Part now obsolete, replace with CSC 1301 which has a supplied spacer.