Truma S2200/S2200P room heater cowl disc.
Truma S2200/S2200P air intake grill.
Truma S2200 wall cowl cover, fits air intake and exhaust flue.
Flue Cowl fits Trumatic 2800 / 4000 E series heaters, C 6002 & 4002 and Combi 4 & 6 boilers, fits with 2 screws, approx diameter 110 mm, from 03/2005. Colour White.
Flue Cowl fits Trumatic 2400 E series heaters, fits with 2 screws, overall dia approx 95 mm, only for flues fitted after 03/2001, for older models the complete wall flue assembly must be replaced. Colour White.
Part is now obsolete
Truma E 2400 Exhaust sealing O ring, 22 mm x 2 mm
Truma E series control panel cable. 4 metres.
Truma E series Control Panel
Truma S3002 heater top shelf, colour dark brown.
Truma knob socket for S3002 / S5002 heater 1993 onwards.
Truma roof cowl for AK3 and AKL 5 flue assembly, used in association with 2200, S3002 (P), 5002 and S55T Trumatic heaters.
Truma AKL 5 roof cowl assembly for Trumatic 5002 and S55 T heaters. See More Info.
Truma AK 3 roof flue cowl assembly, for Trumatic 2200 and S3002 (P) heaters. See More Info.
Truma ignition pipe for 5002 heater.
Trumatic heater control rod kit, consists of: 1- control rod, 1 - control knob and 1 - knob socket. Select Below.
Truma gas valve control rod suits SL-S-5004 heater.
Truma S3002 extension kit with perforated plate and spring after 12/1988.
Truma perforated plate for Truma S3002, S3004, S5002 and S5004 heaters.
Truma extension spring for Truma S3002, S3004, S5002 and S5004 heaters.
Truma exhaust duct fitting kit for Truma S3002 heater.
Truma mica window kit for Truma S3002 heater. 42mm x 15mm.
Truma S3002 and S5002 heater gas valve kit, complete with micro switch, flue o-ring, brackets and nut
Truma S3004 and S5004 heaters valve kit. Truma/Carver gas valve complete with micro switch if needed, with new flue O-ring.
Truma safety gas control valve kit, includes safety pilot valve, O Ring 52 x 5mm, manifold valve nut and 8mm brass olive. Fits Truma S3004 and S5004.
Truma auto ignition unit, fits S3002 / S5002 heaters from 07/1999, produces spark to ignite gas, has provision for 1.5v battery (battery and connector cable not included).
Replaces 30050-53000
Screw on spark electrode for Truma S3002 heater. Length 450mm. For use with auto ignition.
Screw on spark electrode for Truma S3002P heater. Length 950mm. For use on heater with older style case and piezo ignition from May 1993.
Trumavent control switch, for TEB - 2 fits into heater front case, cable not included.
1x piece available
Trumavent TEB-2 replacement circuit board, for 12 Volt fan.
Note: Please be sure your are ordering the correct PCB as they are a non returnable item.
1x available
Discontinued.
Replaced by TEB-3 motor 40000-00033 and adapter plate 30090-98700
Truma TEB-2 cable for control panel. 800mm.
Truma intergarted control panel for TEB-3 Fan.
.
Wiring harness to suit TEB-3 fans with intergrated TEB-3 control panel. This harness is 0.8 m long.
Truma TEB-3 replacement circuit board for 12 volt fan.
Note: Please be sure your are ordering the correct PCB as they are a non returnable item.
Truma carbon brush set for TEB-3 fan motor. Pair.
This kit is the replacement (upgrade) control panel for the Alde 3010 heating range. An installation frame is included for those customers who upgrade from the older LCD panel 3010 213. For those upgrading from the black and white control panel 3010 413, only the vertical installation dimension of 10 mm needs adjusting. A new manual and installation instructions are included.
Truma Ultraheat replacement heating element, mains 230-240 Volt. This is a service replacement part not an installation kit. Must be fitted by a competent person. See More Info.
Control panel for Truma Ultraheat from 05/2002. Black.
Second hand control panel for Truma Ultraheat. Switch control panel without cables
1x available
Trumavent control panel for 230V with cable. Suits TN fan 05/1996 to 12/2014.
Trumavent control panel 12 volt with cable. Suits TEB2 and TEN2 fan 05/1996 to 12/2014.
Truma Trumatic control panel C EL 230 volt.
Truma piezo ignitor kit, fits new style S3002P heater with curved front case, fits to the top right hand side of the heater. Includes piezo ignitor and S3002P earth spring.
Truma piezo ignitor, fits older style S3002 P heater with square flat fronted case, fits to the top left hand side of the heater. From July 1981 - March 1993
Truma piezo ignitor kit. Fits S3004/5004 series heater.
Truma S3002 base plate. This plate is at the bottom of the fire assembly which screws to the floor and has the heat exchanger mounted on top.
Part superseded by Truma part number: 30090-92200 , our part number: CCG 27433
Full kit which includes burner, pipe, electride, thermocouple, etc
Truma burner assembly kit for S3002 and S3004 series heater with electronic ignition. 30mb. Kit includes electrode, thermocouple and jets, see more info
Truma Thermocouple 250mm long, suits SL-S-5002 / S-SL-SLP -3002 heaters, compatible with control valve CCG 2731
Truma flue sealing 'O' ring. Suits S3002 and S5002 heaters. Select size below.
Ultraheat remote temperture sensor jack cable link to joint sensor cable to jack plug on circuit board.
Truma ultraheat temperature control device.
Truma Ultraheat temperature limiter.
Truma stainless steel exhaust ducting. AE3. 55mm Diameter. Price per metre.
Carver Fan Master 4000 electronic control unit.
Truma Magnetic Insert Mini for the Trumatic S3002 / S3004 and Truma S5002 / S5004 heaters
Truma 30mbar burner to suit Trumatic S5002/S5004 heaters
Teb 3 fan motor for the s3004 & s5004 heaters - DC motor 12V
Adapter plate for TEB 2 and TEB 3
Truma heat deflector sheet for Truma 5002 series heater.
Truma S5002 heater top shelf, colour dark brown complete with control knob & bezel, and 3 blanking inserts.
