Water flow regulator for the Morco Primo MP6 & MP11 water heaters (MP0240)
Gas valve/ burner manifold (Direct connection) for the Morco Primo MP6 & MP11 water heaters (MP0260)
Gas valve for the Morco Primo MP6 & MP11 water heaters (MP0270)
Mag valve for the Morco EUP6, Primo MP6 & MP11 water heaters (MP0280)
Morco FW0330 pilot assembly suitable for Morco D51B, G101B, D61B, D61E, G111E and G11E water heaters.
Please note, Morco advise that before buying a replacement pilot burner, the old burner should be thoroughly cleaned as this has shown effective in resolving issues with the operation of the part.
Morco burner bar with injectors FW0135. Suitable for: D51B-B, D51B-C, D51B-E, D61B, D61E
Main burner (FW0113) for Morco G11
Gas and water control knob - Old (MRS0020) (Without Guide) for Morco F11E
Gas and water control knob (MRS0021) (With Guide) for Morco F11E
Gas control knob D61 (FW0097) for Morco D61E, G111E, G11E
Morco water control assembly, replaces the MRS0160 for Morco F11E
Water control assembly (FW0163) fo Morco D61B, D61E
Water control assembly (FW0162) for Morco G11
Diaphragm (MRS0140) for Morco F11E
Morco water heater diaphragm FW0180 is compatible with the following Morco models: D51B, D51B-B, D51B-C, D51B-E, D61B, D61E, G11E, G101B-B, G101B-C, G111E
Electrode unit (MRS0090) for Morco F11E
Gas isolation valve for Morco D61 accepts a 10mm feed. For Morco D51B, D61B, D61E
This kit contains: x2 15mm x 3/8" T2 Female Coup Short Thread (PEGM38), x1 15mm x 3/4" Gas Coupling (PEGGAS), x2 3/8" BSP washers (FCB1295). For Morco D51B, D61B, D61E
Kit comprising of a replacement water housing union (FW0260) and drain screw (FW0251) to replace the larger old type drain screw (FW0250) for Morco D61B, D61E, G111E, G11E.
Small drain screw and washer (FW0251) for Morco D61B, D61E, G111E, G11E
Gas isolation valve for Morco G11 accepts a 15mm feed.
Twin walled Internal flue pipe for water heaters, white enamel 420mm/350mm
Morco heat exchanger FW0033 is suitable for Morco D61B and D61E water heaters.
