FIAMMA CARRY BIKE INTERNAL BRACKET COVER (2) - 98656 - 276
Pack Of 2
Cover plates to fit Fiamma bike rack, without Fiamma branding
Pack of 6 screw caps & covers for fitting wheel arches etc.
6 x off white plastic.
20mm overall diam.
12mm diam cut size.
Plastic grab handle, black polypropylene with 2 fixing concealed holes (See More Info), overall length 170 mm, width 28 mm, height 40mm. Hole fixing centres 137mm. Colour Black.
Plastic grab handle, black polypropylene with 2 fixing holes, overall length 208 mm width 29 mm and height 45mm. Hole fixing centres 165mm. Colour Black.
Rigid plastic grab handle with 2 fixing holes, overall length 245mm, width 25mm . Hole fixing centres 203mm/8inches. Colour Black.
Polyester coated die cast grab handle, with rubber core comfort grip. Length 164mm, width 43mm and height 45mm. Hole fixing centres 150mm. Grey.
Chrome plated die cast grab handle. Length 195 mm. Hole fixing centres 150mm. Fixing hole diameter 6mm. Overall height 46mm.
Nylon door retainer, holds caravan door back when open. Hole fixing centres 35mm. Colour white.
Sturdy spring loaded retainer suitable for worktops, sink tops and most locker doors made of white plastic and requires to be screwed into place (we recommend also using a strong adhesive as well) and screws are not included.
Often used in our workshop to hold locker doors.
Plastic door retainer, holds caravan door open. Fixing hole centres 32mm. Colour White.
Veneta door retainer, used to securely hold your caravan door open. Fixing hole centres arm 45mm - base 30mm. Colour White.
Viva door retainer, with sprung loaded action. Fixing hole centres arm 40mm - base 60mm. Colour white.
Extended Viva door retainer, without spring loaded action. Fixing hole centres arm 40mm - base 60mm. Colour Off White.
Lever release barrel door retainer. See Spec. for further image. Colour Black, White or Grey
Thetford door 5 rubber seal, provides a weather seal around a Thetford door 5 service hatch.
Plastic barrel door retainer, for door thickness of 25mm and mounting hole of 25mm diameter. Colour Black.
W4 quick release barrel door retainer is a popular plastic door retainer as used by several manfacturers, including Swift, Bailey, Lunar and Fleetwood. Supplied with fitting instructions and therefore ideal for use on any caravan door, as well as being a replacement. Colour Black.
Gravelly friction fastener and plate, a robust quality product, chrome plated finish. Base plate size 45mm diameter. 2 hole fixing. Often used to secure flaps, draws, doors, hatches and to hold number plates in place etc.
Spring loaded catch - press end button to release. Used by the Swift Group to retain external locker doors.
Replacement MC keys all numbers from 1 to 80, sold in pairs - please state key number required in comments box at checkout.
Caraloc 700 complete two part replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Replacement barrell and keys to suit Caraloc 400 & 700.
Caraloc 400 complete two part replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Caraloc 640 replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Rubber cavity fixer short. 12mm. Hole size 8mm. Pack of 2.
To replace Caraloc and WD standard barrels with a high security lock with over 1000 combinations. Comes with removal tool and 4 keys.
Caraloc 2000 replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Vecam replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on the hinge location as viewed from the outside of your motorhome or caravan.
W4 external locker door lock assembly complete with 2 keys. Used by manufacturers including Swift and Explorer on external locker doors. See More Info. for dimensions.
Stay safe with the M shaped Fiamma Security S handle. While travelling Fiamma security handles take up little space when folded against the wall. They also serve as a useful handle to make entering and exiting the vehicle easier. They adapt to all doors opening both to the right or to the left. Complete with key lock safety release handle installation brackets screws internal counter-brackets. Painted aluminium construction. 30mm diameter and 2mm thick. Height 46cm. Less projection and less space between the handle grip and the vehicle, thus improving the entering into the vehicle.
W4 compartment lock assembly complete with 2 keys.
Replacement barrel lock complete with two WD keys and a handy tool for easy removal of the original barrel.
W4 compartment lock cover keeps dirt and moisture out of the lock mechanism, avoiding rusting and malfunction.
2 in a pack
Thetford Model 4 gas and water tank door frame. Incorporates double seal to help waterproof locks and assist insulation. Integrated hinges and come with white GRP infill.
To suit wall thickness 24mm to 40mm and aperture size 630mm x 330mm. Overall dimensions 700mm x 395mm.
Thetford SD sleeve non cassette version for servive door 3.
Thetford white service door 4 inner frame.
Thetford service door 5 inner frame in white.
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
AL-KO spare wheel carrier, suits ALKO chassis that are 1050mm to 1250mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
AL-KO spare wheel carrier, suits ALKO chassis that are 1260mm to 1515mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
AL-KO spare wheel carrier, suits ALKO chassis that are 1510mm to 1815mm between chassis rails, all ALKO chassis will accomodate this type of carrier and is pre punched to suit, and is an easy DIY job to fit, it will carry all sizes of wheel used on ALKO axles. the wheel is carried safe and secure under the caravan between the chassis rails. The carrier features a sliding mechanism with internal self lubricating guiding elements, that support the carrier tubes, making the operation smoother and more efficient. See More Info. for measurement details.
Lift the dot fasteners. Choice of 5 single screw studs or 5 studs with two screw hole base. Each pack also contains 5 clinch plates and 5 sockets. Please select below. See More Info.
Flue kit for Forcali water heater. Available for 6 Litre and 10 Litre models. Select below.
Replacement key for gas locker boxes. Southco.
Awning pole mounting brackets, with stainless steel screws. Colour White. 2 per pack.
Awning skirt studs and poppers, complete with stainless steel screws. 5 sets per pack.
Number plate screw and cap in yellow for rear number plates. Pack of 2.
STERLING Foaming Tyre Shine Aerosol/Spray (400ml). With Spray Nozzle. Foaming tyre dressing. Restores a lasting sheen to tyre walls. Simple one step application
Press stud closing tool for use with CCW 2200 and CCW 2222 awning skirt studs.
Dometic Seitz SK5 infill in RAL9001 or White
Dometic Seitz SK5 Service Hatch 360mm x 310mm in Fiat White with matching infill
Dometic Seitz SK5 Service Hatch Door and Frame 360mm x 310mm in RAL9001 with matching infill
Dometic Seitz SK5 Service Hatch Door 360mm x 310mm in RAL9001 with matching infill
Replacement white outer frame, keys and barrell only, no inner frame or fixing kit.
Size 1038mm x 460mm, opening980mm x 400m
THETFORD WATERFILL DOOR FOR EASY EXTERNAL ACCESS TO THE WATER TANK IN YOUR CARAVAN OR MOTORHOME.
THE THETFORD WATER FILL DOOR FEATURES AN INCREDIBLE, CONTEMPORARY APPEARANCE AND COMES SUPPLIED WITH A LOCK AND KEY FOR ASSURED SAFETY AND SECURITY.
REPLACEMENT OR NEW INSTALLATION COMPLETE WITH ZADI LOCK AND 2 KEYS
Thetford soft tray battery bag 2662
Available incream, white or grey.
Thetford flush door 3. Dimensions 385x385mm, cut our dimensons 349x296mm
Takes FAWO 1 lock & keys ( not included)
The rubber door seal for the Thetford Flush Door 3 (FD3). The seal helps to keep the door closed tightly and can help to prevent water from leaking into the locker.
Pair of Thetford hinge pins for flush door 3 & 5
This infill panel is used to fill the frame of the Thetford Flush Door 5 (FD5).
Available in grey (RAL9006), white, off white (RAL9001)
Thetford flush door 5, fits a fawo 2 barrel not included.
Available in white (80)
Rubber seal for Thetford Flush Door 5 (FD5). Ensures the door is tightly sealed shut and prevents and water from entering through the door.
Thetford Zadi barrel housing for Thetford Cassette Toilet Locker Service Doors 3,4,5,6,7.
To Suit 2680480 OEM door
.jpg "Thetford SD3 Infill")
This infill panel is used to fill the frame of the Thetford Standard Door 3 (D3). When replacing any locker doors, the infill panel may become damaged and be in need of replacement.
This panel comes in a grey colour which was used in the Bailey Pursuit Plus vans, white, RAL7042, Grigio Grey.
Inner frame sleeve for non-cassette version of door. Number 5 on diagram.
Available in white (80)
Thetford SD3. Has 1 x lock button, 1 x push button. Overall size 385 x 335mm. Daylight opening 330 x 280mm.
Door inner is inculded 2683280
Compact size door. 1 x lock button, 1 x push button. Overall size 385 x 335mm. Daylight opening 330 x 280mm. Comes with zadi lock and 2 keys.
Available in white (80) or grey (84)
Compact size door. Total dimensions h x w : 385 x 335mm, Overall: size 385 x 335mm,
Door opening dimensions h x w : 330 x 280 with 1x Push-button latch with lock, and 1x Push-button latch
Available in white (80), grey (84) or black (27).
When a Thetford Standard Locker door is fitted onto a vehicle, any potential gapping that may occur between the frame of the door and the body of the van is sealed with a gasket. This gasket will fit a Thetford Standard Door 3 and will make sure that your locker door stays watertight.
Thetford door 3 rubber seal, provides a weater seal around a Thetford door 3 service hatch.
Thetford SD345 kit for exterior service locker door.
Thetford service door housing Wesy Alloy snake cut lock for SD 3,4,5,6,7 doors.
Button assembly for Thetford service door 3, 4, 5, 6, 7 housing FAWO1
Plastic housing for Thetford service door 3,4,5,6,7 FAWO2
Thetford service foor clips, pack of 18 for service doors 3, 4 & 5, 6, 7, and battery box and wet locker box
1x Thetford 95mm hinge pin for service doors 3, 4 & 5, 6, 7, and battery box and wet locker box
Push button for Thetford service doors 3,4,5 & 6
This infill panel is used to fill the frame of the Thetford Standard Door 4 (D4). When replacing any locker doors, the infill panel may become damaged and be in need of replacement.
This panel comes in the off-white colour RAL9001, grey, white and RAL7042
Thetford SD4 inner frame sleeve. Number 5 on diagram.
Door typically used for gas bottles & water tank. 2 x locks. Overall size 685 x 385mm. Daylight opening 630 x 330mm. Includes door and frame inner.
Available in white (80), grey (84) or black (27)
Thetford service door 4 doorseal
This infill panel is used to fill the frame of the Thetford Standard Door 5 (D5). When replacing any locker doors, the infill panel may become damaged and be in need of replacement.
This panel comes in a white, grey (as used in Bailey Pursuit Plus Models), Grigio Grey (as used in Bailey 2019/2020 Discovery Models), RAL7042
Thetford SD5 door only. Does not come with the locks or fitting template. 785mm x 340mm - 2x push button latch with lock
Available in white (80) or grey (25)
Thetford service door 5 features: 2 x lock button, Lock included, Rain diverter, typically used for water tank access and general luggage door.
Overall size 785 x 335 mm, Opening 730 x 280 mm, Cut out dimensions: 749x297mm, Possible wall thickness 23-39mm.
Available in white (80)
Thetford service door 5 seal
General luggage door with zadi barrel lock. 1038mm x 465mm - 3x push button latch with lock
Available in grey (25)
General luggage door for large objects. 3 x lock button. overall size 1038 x 460mm. daylight opening 980 x 400mm.
Available in white (80)
Thetford service door 6 door seal
Thetford SD67 kit for exterior service locker door.
replacement thetford door seal for the service door 7
Door 3 Inner Frame 28-34mm
