Alko Profi V 3500kg Damper, 2000KG TO 3500KG.
Length: 430mm long. Tube end: 81mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko 120S STABILUS damper
Length: 340mm long bolt centre to bolt centre. Bolt holes are 10mm with rubber bushes
Alko 120 S SV SR damper.
Length: 400mm. Tube length: 215mm.
Alko 131R damper from 1985-1992
Length: 350mm. Tube length: 180mm. Hole centres are 325mm apart.
Alko rubber bush for the rear of a 150V or 200V damper.
This fits on the treaded end between two metal washers.
Thickness: 5mm, Centre hole: 10mm, Diamter: 21mm
This damper fits AL-KO 160SR and 200SR couplings
This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
Replacement gaiter for Alko AKS 2004 and 3004 stabilisers.
Coupling damper suitable for ALKO 60/90. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 161 Short (pre 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 161 Long (post 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 251 Short. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 251 Long. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 60/90 (including side spacer). Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Rubber Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
35/55mm diameter, 80mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Rubber Vented bellows with bolt cover for ALKO 161S / 251S couplings
54/49mm diameter, 125mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Universal rubber bellows/gaiters for trailer and caravan couplings with 5 folds.
60mm diameter, 120mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
These bellows fit most Al-ko 30s, 60s 90s,120s/SR, 250s and 101VB couplings .
35mm draw tube, approx 100mm long, 30mm round opening on the head end, 40mm opening on the other end.
May fit other couplings.
Integral security lock and keys which is suitable for many pressed steel couplings. The lock prevents the coupling handle from being operated. Two keys provided.
Fits all Maypole pressed steel couplings up to 3000kg. Soft dock is easy to fit, push it over the coupling head. Soft rubber finish. Effective protection against dents or scratches to the rear of the tow vehicle.