Gas feed pipe for Carver 2000 heater. Carver Part No. 602546.
Burner feed pipe for Carver 2000 heater. Carver Part No. 602536.
Burner feed pipe for Carver 1800 heater. Carver Part No. 602535.
Heater gas feed pipe for Carver 1800 heater. Carver Part No. 602543.
Henry water heater is an exact replacement for the popular Carver Cascade 2 GE, gas and 240v, has a powerful 830 watt heater element. The Henry comes complete wall switch and exterior flue cowl. PLEASE NOTE: THESE WATER HEATERS ARE NO LONGER AVAILABLE. FOR REPLACEMENT SEE CCG 2139 MALAGA E WATER HEATER.
Henry water heater is an exact replacement for the popular Carver Cascade 2 GE, gas and 240v, has a powerful 830 watt heater element. The Henry comes complete wall switch and exterior flue cowl. PLEASE NOTE: THESE WATER HEATERS ARE NO LONGER AVAILABLE. FOR REPLACEMENT SEE CCG 2139 MALAGA E WATER HEATER.
Wiring harness for Henry water heater. This harness is only required if you are fitting a replacement Burner Module Part No. CCG 2706 and you have the older model of Cascade 2 water heater that has the round multi-pin plugs fitted. It is not required if you are purchasing a complete Heater Part No. CCG 2138 as this harness is included.
Wiring harness for Henry water heater. This harness is only required if you are fitting a replacement Burner Module Part No. CCG 2706 and you have the older model of Cascade 2 water heater that has the round multi-pin plugs fitted. It is not required if you are purchasing a complete Heater Part No. CCG 2138 as this harness is included.
Malaga adapter plate which allows you to replace a Carver Cascade 2 water heater with a Malaga water heater, without the need to modify the bodywork of caravan / motorhome.
Malaga adapter plate which allows you to replace a Carver Cascade 2 water heater with a Malaga water heater, without the need to modify the bodywork of caravan / motorhome.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Carver Cascade Rapide wall switch. Colour Beige. Carver Part No. 101761.
Carver Cascade Rapide wall switch. Colour Beige. Carver Part No. 101761.
Carver Cascade Rapide wall switch. Colour Beige. Carver Part No. 101761.
Carver Cascade Rapide wall switch. Colour Beige. Carver Part No. 101761.
Carver Cascade 2 water heater drain plug fits early models pre 1987, identified by cross on top.
