Truma Combi C6002EH heating element from June 2004 onwards, with WHITE cable.
Trumatic heater control rod kit, consists of: 1- control rod, 1 - control knob and 1 - knob socket. Select Below.
Truma Combi E power selector switch. Colour Black (not grey as shown).
Truma gas valve control rod suits SL-S-5004 heater.
Truma Combi CP (E) Classic control panel fits Combi 4, 6, 2E, 4E and 6E.
Truma Combi outer casing.
Truma Combi 4, 4E, 6 and 6E water temperature sensor.
Truma S3002 extension kit with perforated plate and spring after 12/1988.
Truma perforated plate for Truma S3002, S3004, S5002 and S5004 heaters.
Truma extension spring for Truma S3002, S3004, S5002 and S5004 heaters.
Truma exhaust duct fitting kit for Truma S3002 heater.
Truma mica window kit for Truma S3002 heater. 42mm x 15mm.
Truma Combi 230 volt Reset Switch.
Truma S3002 and S5002 heater gas valve kit, complete with micro switch, flue o-ring, brackets and nut
Truma S3004 and S5004 heaters valve kit. Truma/Carver gas valve complete with micro switch if needed, with new flue O-ring.
Truma safety gas control valve kit, includes safety pilot valve, O Ring 52 x 5mm, manifold valve nut and 8mm brass olive. Fits Truma S3004 and S5004.
Truma auto ignition unit, fits S3002 / S5002 heaters from 07/1999, produces spark to ignite gas, has provision for 1.5v battery (battery and connector cable not included).
Replaces 30050-53000
Hinge pins for Carver / Truma Mk 2 Crystal Housing Lid. Price per pair. Available in ivory or white.
TRUMA SPACE HEATER AUTO IGNITOR REPLACEMENT. AUTOMATIC IGNITOR FOR TRUMATIC S2200, S3002 AND S5002. COMPATIBLE WITH THE PREVIOUS SL3002 TRUMA SPACE HEATER AUTO IGNITER. S2200/S3004/S5004/S3002/S5002 AND S55T (UNTIL 06/2000). (30050-53000)
Screw on spark electrode for Truma S3002 heater. Length 450mm. For use with auto ignition.
Screw on spark electrode for Truma S3002P heater. Length 950mm. For use on heater with older style case and piezo ignition from May 1993.
Trumavent control switch, for TEB - 2 fits into heater front case, cable not included.
1x piece available
Trumavent TEB-2 replacement circuit board, for 12 Volt fan.
Note: Please be sure your are ordering the correct PCB as they are a non returnable item.
1x available
Discontinued.
Replaced by TEB-3 motor 40000-00033 and adapter plate 30090-98700
Truma TEB-2 cable for control panel. 800mm.
Truma intergarted control panel for TEB-3 Fan.
.
Wiring harness to suit TEB-3 fans with intergrated TEB-3 control panel. This harness is 0.8 m long.
Truma TEB-3 replacement circuit board for 12 volt fan.
Note: Please be sure your are ordering the correct PCB as they are a non returnable item.
For guiding the warm air from the existing caravan heater directly into the awning.
Contents:
Warm air outlet with cover
1 metre of ducting
65mm diameter straight connector
T-pipe TS and duct shut-off SP2
Replaced by full kit: CCG 27367
Truma carbon brush set for TEB-3 fan motor. Pair.
This kit is the replacement (upgrade) control panel for the Alde 3010 heating range. An installation frame is included for those customers who upgrade from the older LCD panel 3010 213. For those upgrading from the black and white control panel 3010 413, only the vertical installation dimension of 10 mm needs adjusting. A new manual and installation instructions are included.
Truma Ultraheat replacement heating element, mains 230-240 Volt. This is a service replacement part not an installation kit. Must be fitted by a competent person. See More Info.
Control panel for Truma Ultraheat from 05/2002. Black.
Second hand control panel for Truma Ultraheat. Switch control panel without cables
1x available
Trumavent control panel for 230V with cable. Suits TN fan 05/1996 to 12/2014.
Trumavent control panel 12 volt with cable. Suits TEB2 and TEN2 fan 05/1996 to 12/2014.
Truma Trumatic control panel C EL 230 volt.
Truma piezo ignitor kit, fits new style S3002P heater with curved front case, fits to the top right hand side of the heater. Includes piezo ignitor and S3002P earth spring.
This electronic circuit board controls all functions of the Truma Combi 2E heater.
This electronic circuit board controls all functions of the Truma Combi 4 / 4 E heater with electric heating facility.
This electronic circuit board controls all functions of the Truma Combi 6 / 6 E heater with electric heating facility.
See Spec. for ordering details.
This electronic circuit board controls all functions of the Truma Combi C6002 E heater with electric heating facility.
Truma Combi D glow plug.
Truma Combi control panel fits the old C Combi, 3402, 4002, 6002, 6002EH.
Part obsolete.
Truma Ultrastore control knob.
This water tank fits the Truma Combi 2/2E 4/4E 6/6E heaters. Kit includes Combi replacement tank, 80 x 2mm seal, Combi sealing bracket, Combi form seal, Combi screw/nut set, round cord seal set and 3 x ducting clips. See More Info.
Truma Combi connection cover.
This air combustion motor and fan fits the Truma Combi 2/2E 4/4E 6/6E heaters. See More Info.
Truma piezo ignitor, fits older style S3002 P heater with square flat fronted case, fits to the top left hand side of the heater. From July 1981 - March 1993
Complete burner assembly for Truma Combi C6002 / C3400. This unit comes complete with ignition electrodes and flame rectification sensor.
This part is no longer available.
Truma piezo ignitor kit. Fits S3004/5004 series heater.
Truma Ultraflow replacement shower lid in white
Lid for Truma Ultraflow Housing (CCG 2723). Colour White.
Truma S3002 base plate. This plate is at the bottom of the fire assembly which screws to the floor and has the heat exchanger mounted on top.
Part superseded by Truma part number: 30090-92200 , our part number: CCG 27433
Full kit which includes burner, pipe, electride, thermocouple, etc
Truma burner assembly kit for S3002 and S3004 series heater with electronic ignition. 30mb. Kit includes electrode, thermocouple and jets, see more info
Truma Thermocouple 250mm long, suits SL-S-5002 / S-SL-SLP -3002 heaters, compatible with control valve CCG 2731
Truma flue sealing 'O' ring. Suits S3002 and S5002 heaters. Select size below.
Lid for Truma Ultraflow Compact housing (CCG 2721) .
Replacement twin water hose for Carver / Truma submersible water pump assemblies. Colour blue.
Tool for the easy removal of the Carver Crystal Mk 2 water filter.
Replacement cap and sealing ring for Truma Ultraflow filter. Colour Blue.
Universal thermocouple kit with interchangeable ends to fit most appliances. 1200 mm.
Universal thermocopuple kit with interchangeable ends to fit most appliances. 900mm.
Truma adapter plate which allows you to replace a Carver Crystal Mk 1 water inlet housing with a Truma Ultraflow housing, without modification to bodywork of caravan / motorhome.
1x available
Truma window switch prevents operation of LPG heaters with open windows if the cowl is installed below the window or up to 30 cm beside it. Universal for all common caravan hinged windows. Complete with 4m cable, adapter 2 screws.
Truma over heat sensor, safety trip that trips out should the boiler over heat. This item is usually brought with item CCG 27502 Temperature sensor.
Truma C Series Temperature sensor, monitors the boiler temperature whilst in operation. This item is often brought with part No CCG 27501 over heat sensor.
Truma C34/6000 control panel cable, 5 metres.
Truma ignition electrode kit for Truma Combi 4, 4E, 6 and 6E series.
Truma exhaust flue 'O' ring seal for Truma Combi heater 40 x 2.5mm
Truma Remote room temperature sensor for Combi from 05/2002 onwards.
Connection cable for Combi and Ultraheat remote temperture sensor 4 m long with end connectors.
Ultraheat remote temperture sensor jack cable link to joint sensor cable to jack plug on circuit board.
Truma ultraheat temperature control device.
Truma Ultraheat temperature limiter.
Outer case for the Truma Ultrastore water heater.
Flame rectification electrode to suit Truma Ultrastore Series 2 / 3 > boiler.
Flue extension kit for Truma Ultrastore water heater. This kit extends the existing flue by 50 mm.
Truma Ultrastore circuit board for 30 mbar and 50 mbar Ultrastore heaters from 07/1993.
Note: Please be sure your are ordering the correct PCB as they are a non returnable item.
Truma Ultrastore Series 3 boiler and Electroboiler on/off control panel with 3 metre lead and bezel. See More Info. for closer detail.
Truma Ultrastore temperature control panel for Truma Ultrastore Series 3 from 05/2002. No cable.
Truma stainless steel exhaust ducting. AE3. 55mm Diameter. Price per metre.
Carver Fan Master 4000 electronic control unit.
Automatic shut-off equipment for connecting a window switch for automatic equipment shut-off if the flue is installed beneath or up to 30cm beside an opening window.
Window switch not included. for Ultrastore Ultrastore automatic shut-off equipment.
Truma Combi water sensor for Combi 4/4e/6/6e
Truma seal kit for Combi E. See more info for what is included.
Whale Exapanse Gas and Electric PRD Valve
Whale Expanse replacement flue terminal
Whale 2kw Space / Expanse control panel
Whale Expanse 40/22mm 2m flue kit
Whale Expanse 40/22mm 1.25m flue kit
Whale Expanse 40/22mm 0.75m flue kit
Whale CBE 4Kw control panel kit SH0804xx for the gas/electric Space heater & Expanse. Suitable for DW0801UR
Whale Expanse communication PCB
Whale Expanse main PCB
Whale Expanse PCB gas & electric
Whale Expanse main PCB
Whale Expanse gas only main PCB
Whale Expanse gas & electric main PCB.
Whale Expanse gas analogue control panel.
Whale Expanse PRD valve lever
Whale Expanse 12mm braided hose for water heaters.
Whale IVAN Expanse gas & electric control panel
Whale IVAN Expanse control panel for IV1004
Whale IVAN Expanse gas & electric control panel
Whal Expanse communication PCB
Whale IVAN Expanse Communication PCB
Whale Expanse overheat stat
Whale Expanse gas & electric temperature sensor
Whale Expanse electric element assy 1.5Kw
Whale Expanse burner assembly
Whal Expanse communication PCB
Whale Expanse harness anlg gas and electric 3.5m
I deal for van/camper conversions. Designed for use with the below bottles
Truma S5004 WITH AUTO IGNITOR If you have a large caravan or motorhome that will require a more powerful heater than the Truma S 3004, then look no further. The Truma S5004 is very similar in design and function to that of the popular S 3004 version just with much more power to heat you vehicle. Also available with a range of accessories such as the TEB 2 Fan and Ultraheat, the Truma S 5004 also allows you to use the flame effect fire front as well as the normal range of front cases by Truma. The gas and electric varient of this fire lends well to all needs, whether you are an occassional weekend tourer or all year round ralleyer. PRICE INCLUDES FRONT CASE. Choice of Front Case Colour. Select below. With Installation box for 1 fan.
Truma S3004 WITH AUTO IGNITOR is designed for use in average sized caravans. Thermostat and installation box as standard. Also available as a retro-fitted product, the Truma S3004 caravan gas heater has a range of options and accessories available with it, for example, the Ultraheat and TEB 2 Fan. Exhaust duct via the roof
Thermal output 3.5kW. Gas consumption 30 - 280 g/h. To best suit your caravan, the Truma S3004 caravan gas heater has a variety of different front cases to choose from and its modern curved design contributes to the homely feel of your pride and joy. PRICE INCLUDES FRONT CASE.
The Truma S2200 is the perfect gas heater for smaller vehicles and caravan applications, the S 2200 is considered the Truma's entry level, gas space heater based upon price and capability. With an output of 1,850 W, the Trumatic S 2200 is the perfect solution when it comes to warming up a small caravan as quickly as possible. With Piezo ignitor. Control knob on Left - exhaust duct on Right.
Also available with electronic ignition.
FREE UK DELIVERY
Enjoy twice the comfort with Truma Combi 6E CP Plus iNet ready space and water heater in one appliance. This saves space and weight in your motor home or caravan. A 10-litre water tank, which is also heated in winter, is integrated into the system. In summer mode you can heat the water independently of the space heater. The warm air flows into the vehicle’s interior through four air outlets where it is distributed optimally to ensure a pleasant indoor climate. The Truma Combi heater is almost silent and extremely economical to run. Your Truma Combi 6 is controlled conveniently with a digital control panel. If you also have a Truma air conditioner in your vehicle, you can select the automatic climate control option on the control panel. It automatically coordinates the Combi heater and air conditioner and keeps your preferred temperature constant in all weathers. See More Info.
For full list of replacement parts for the Truma Combi 4E / 4 / 6E / 6 heater manufactured after 03/2007 click - More Info.
Parts for other models are available on request
01295 712380 or email caravanpartsonline@outlook.com
Enjoy twice the comfort with Truma Combi 6E CP Plus iNet ready space and water heater in one appliance, with 230 volt electric heating facility. This saves space and weight in your motor home or caravan. A 10-litre water tank, which is also heated in winter, is integrated into the system. In summer mode you can heat the water independently of the space heater. The warm air flows into the vehicle’s interior through four air outlets where it is distributed optimally to ensure a pleasant indoor climate. The Truma Combi heater is almost silent and extremely economical to run. Your Truma Combi 6E is controlled conveniently with a digital control panel. If you also have a Truma air conditioner in your vehicle, you can select the automatic climate control option on the control panel. It automatically coordinates the Combi heater and air conditioner and keeps your preferred temperature constant in all weathers. See More Info.
Enjoy twice the comfort with Truma Combi 4 CP Plus iNet ready space and water heater in one appliance. This saves space and weight in your motor home or caravan. A 10-litre water tank, which is also heated in winter, is integrated into the system. In summer mode you can heat the water independently of the space heater. The warm air flows into the vehicle’s interior through four air outlets where it is distributed optimally to ensure a pleasant indoor climate. The Truma Combi heater is almost silent and extremely economical to run. Your Truma Combi 4 is controlled conveniently with a digital control panel. If you also have a Truma air conditioner in your vehicle, you can select the automatic climate control option on the control panel. It automatically coordinates the Combi heater and air conditioner and keeps your preferred temperature constant in all weathers. See More Info.
Enjoy twice the comfort with Truma Combi 4E CP Plus iNet ready space and water heater in one appliance, with 230 volt electric heating facility. This saves space and weight in your motor home or caravan. A 10-litre water tank, which is also heated in winter, is integrated into the system. In summer mode you can heat the water independently of the space heater. The warm air flows into the vehicle’s interior through four air outlets where it is distributed optimally to ensure a pleasant indoor climate. The Truma Combi heater is almost silent and extremely economical to run. Your Truma Combi 4E is controlled conveniently with a digital control panel. If you also have a Truma air conditioner in your vehicle, you can select the automatic climate control option on the control panel. It automatically coordinates the Combi heater and air conditioner and keeps your preferred temperature constant in all weathers.
This kit includes all parts to install and operate the heater. Does not include any air ducting parts. See More Info.
For full list of replacement parts for the Truma Combi C6002 EH heater manufactured after 06/2004 click
Parts for other models are available on request
01295 712380 or email caravanpartsonline@outlook.com
With 50 m3/h capacity the Dometic circulair performs more efficiently than conventional cooker hoods - while offering a low DC consumption of only 5 watts. A roof-mounted ventilator is no longer necessary as the cleaned air is returned downwards while the suction is concentrated along the edges. This creates an air-dome which stops fumes escaping. Lateral air suction ensures efficient performance with 50 m3/h. Easy installation as no roof-mounted ventilator is necessary. 2 fan-speed regulation and integrated halogen lights. Washable grease filter and exchangeable carbon filter. Snap-on-releases for easy access to filters and lamps. 2 x 10w 12v halogen lamps. 12 volt operation.
Thetford Basic Line 345, 340 replacement support pan rectangle in chrome
Truma WKCD wall cowl complete with extractor fan and onnecting cable. Wall cowl colour is off white. (bianco)
Truma Diesel Combi D6 flue kit 150 cm flue pipe and sound muffler.
Wall flue kit for Truma combi heaters, includes exhaust duct, air supply duct,wall cowl, duct clip. See More Info.
Roof flue kit for Truma combi heaters, includes exhaust duct, air supply duct, roof cowl, duct clips.
Knott-Avonride coupling 750-1300 kg capacity, hydraulically damped for use with auto-reverse brake systems, has facility for 48mm diameter jockey wheel, galvanised pressed steel construction. See our Classic Caravan section for old and obsolete parts.
KFG13 750kg - 1300kg cast steel delta coupling with cast head.
Can be mounted on the a-frame or underneath, the head has a wear indicator on the side and can be locked when fitted on or off the vehicle. Maximum nose weight of 100kg.
Comes complete with two keys, sprung oil damp assisted handbrake assembly, breakaway cable, jockey pad and handle
Knott-Avonride coupling 1400-2700 kg capacity, hydraulically damped for use with auto-reverse brake systems, has facility for 48mm diameter jockey wheel, galvanised pressed steel construction. See our Classic Caravan section for old and obsolete parts.
Knott-Avonride coupling 2250-3500 kg capacity, hydraulically damped galvanised cast coupling for use with auto-reverse brake systems, has facility for 48mm diameter jockey wheel. See our Classic Caravan section for old and obsolete parts.
Euro pressed steel clamp to suit jockey wheels and legs, this clamp allows removal of jockey wheel or leg without removing clamp. Light duty applications.
Dimensions: Length 105mm, Height 55mm, Bolt holes M10
42mm standard duty split clamp suitable for a 42mm jockey wheels and prop stands.
M10 bolt size, 105mm mounting hole centres, Manufactured from 3.5mm steel, Zinc plate finish
48mm standard duty split clamp suitable for a 48mm jockey wheels and prop stands – see related products
M10 bolt size, 105mm mounting hole centres, Manufactured from 3.5mm steel, Zinc plate finish
34mm medium duty split clamp suitable for a 34mm jockey wheels and prop stands
8mm medium duty split clamp suitable for a 48mm jockey wheels and prop stands
MP97438 42mm heavy duty cast steel split clamp suitable for a 42mm jockey wheels and prop stands.
Replacements for Knott cast clamps and suitable for Ifor Williams trailers
ALKO pressed steel jockey wheel clamp, suits 48 mm diameter shaft.
Dimensions: Length 130mm, Height 65mm. Distance between bolt holes 92mm.
48mm heavy duty cast steel split clamp suitable for a 48mm jockey wheels and prop stands.
Replacements for Knott cast clamps and suitable for Ifor Williams trailers
Alko 48mm heavy duty cast steel jockey wheel clamp.
Dimensions: Length 135mm, Height 70mm. Distance between bolts holes 95mm.
48mm serrated heavy duty split clamp suitable for a 48mm serrated jockey wheels and prop stands
A cast iron jockey wheel clamp with a 48mm diameter shaft size and two bolt holes with 150mm centres. This heavy-duty swing clamp is designed to work with the ribbed tubing on the Kartt wheel jockey, our code: CJW 00191, product code KJW4809.
A cast iron jockey wheel clamp with a 48mm diameter shaft size and two bolt holes with 105mm centres. This clamp is suitable for installation on 48mm jockey wheels, including the Kartt jockey wheel, product code KJW4808.
Easy fit jockey wheel clamp fixing kit for 50 & 60mm flat sided drawbars without drilling. Accepts 34mm, 42mm and 48mm clamps (sold separately)
Mounting plate dimensions: 140mm x 122mm , 5mm thick with 4 X M10 holes drilled through plate, 2 elongated .
Location of holes from top: 10mm and 80mm
Distance between holes top to bottom: 70mm centre to centre and side to side 110mm centre to centre
U bolts are M10 thread 60mm x 60mm
Genuin ALKO jockey wheel clamp handle with M12 thread, fits standard ALKO clamps.
450mm x 34mm propstand to help easily distribute trailer loads
600 x 34mm propstand to help evenly distribute the trailer load
450 x 42mm propstand used to evenly distribute the trailer load
.jpg "CCL 1004 42mm x 600mm Prop Stand MP491")
600 x 42mm propstand without handle used to evenly distribute trailer load
450mm x 48mm light commercial propstand without handle used for evenly distributing trailer loads
450mm x 34mm standard duty propstand with handle used for evenly distributing trailer loads
Fenwicks caravan cleaner is economical to use as one bottle will clean up to 40 average size caravans. It will safely remove black streaks, algae, moss, fungus, road and traffic film. Fenwicks is safe to use on acrylic windows, aluminium, rubber, decals, mastic and sealants. 1 LITRE.
Fenwicks motorhome cleaner has an improved formula for use on motorhomes. Corrosion inhibitors have been introduced to protect steelwork and cleaning activity has been increased. 1 LITRE.
Fenwicks Bobby Dazzler is a unique finishing product for caravans and motorhomes which provides a protective coating and enhances shine. Simply applied in the rinse water it protects against road traffic film, acid rain, rust and air bourne pullutants. Fenwicks Boddy Dazzler also contains an algae and mould inhibitor to slow their return. 1 LITRE.
Fenwicks Awning & Gazebo Cleaner comes in a handy spray bottle and has been added to the Fenwick's range due to requests from customers. Suitable for colour fast canvas and synthetic materials. Simply spray on and leave to soak for 30 seconds, rub with a sponge or cloth to remove the dirt. Rinse off with clean water. For stubborn marks it may be necessary to repeat the process. 1 LITRE.
Fenwicks Awning and Tent Re-Proofer quickly restores waterproofing qualities to synthetic and canvas awnings and gazebos. Protects against stains from dirt, grease, oil, food spills and drinks. Deep penetrating, water based, non flammable formula. Can be applied in damp conditions. A 1 litre bottle covers up to 30 square metres. Far safer than solvent based prosducts, due to its biodegradable and environmentally friendly properties. 1 Litre.
Thetford bathroom cleaner is an active foam that has been specially developed for easy, safe cleaning of all plastic surfaces in caravans or motorhomes. Removes hard water stains and ensures not only perfect hygiene but also a brilliant shine. Powerful cleaning agent for daily maintenace.
Thetford handy size duo pack consists of 1 - Aqua Kem Blue lavendarscented toilet fluid 120 ml and 1 - Aqua Rinse flush tank fluid 100 ml. Convenient, space saving idea at a money saving price, offers 2 - 2.5 uses
Caravan Vanity Sink bowl - White
.jpeg "CCS 2003 Bailey Insert Basin")
Bailey insert washroom sink / basin
Bailey AH3 AG1 washroom sink basin
Bailey white vanity washroom corner sink basin
.jpeg "CCS 2006 Bailey Small Belfast Sink")
Corner sink unit, designed to fit into the smallest space. Moulded plastic. Dimensions 279mm x 279mm. Suitable for 3/4" waste outlet (not supplied). Colour White or Ivory.
Caravan corner bowl / plastic sink unit with space for soap and slightly larger dimensions of 355mm x 355mm. Moulded plastic. Suitable for 1 1/4" waste outlet (not supplied). Colour White or Ivory
Vanity bowl / sink with handy space for soap etc. Moulded plastic. Dimensions 508mm x 286mm. Suitable for 3/4" waste outlet (not supplied). Colour Beige (right) £18.47 or Ivory (left) £36.95.
Apollo vanity bowl / sink in White. Space for soap. Moulded plastic. Dimensions 520mm x 356mm x 138mm. Suitable for 3/4" waste outlet (not supplied).
Manufactured from high impact polystryene, the Cleo basin features a no fuss lift out basin for easy cleaning. Integral catchment tank and ample space to fit most popular mixer taps. Colour White. Illustration shows basin open and closed. See More Info.
Thetford triangular stainless steel sink with integrated glass lid. Pre-drilled 33mm tap hole and waste suitable for 1 1/4" waste outlet (not supplied). Dimensions 480mm x 480mm x 140mm. For full specification see Spec.
Thetford Basic Line 34 rectangular stainless steel sink with integrated glass lid. Pre-drilled 33mm tap hole and waste suitable for 1 1/4" waste outlet (not supplied). Dimensions 400mm x 445mm x 145mm. For full specification see More Info.
Smev VA936 sink and drainer in stainless steel with AC 540 siohon abd rubber seals. No tap hole. Overall Dimensions: Width 590mm x Depth 370mm x Height 125mm.
Spinflo Argent stainless steel sink with drainer. Manufactured using high quality materials and components with a contemporary home like design. Easy to clean and makes optimal use of space. Excellent finish with a toughened, heat resistant Chincilla glass lid. Bowl depth 157mm. Overall dimensions 630mm x 470mm. Available in left hand or right hand. Left hand model shown. For full specification see Spec.
Apollo shower tray in ivory. Moulded plastic. Dimensions 584 x 584 x 127mm deep. Waste outlet is located in the corner. Suitable for 1 1/4" waste with 3/4" or 28mm waste pipe (not supplied).
Shower tray in white. Moulded plastic. Dimensions 585 x 585 x 100mm deep. Waste outlet is located in the corner. Suitable for 1 1/4" waste outlet (not supplied).
Shower tray in Ivory. Moulded plastic. Dimensions 670 x 670 x 115mm deep. Waste outlet is located in the corner.
Smev single burner stainless steel hob and sink unit with safety glass lid and piezo ignition. Detachable chromed pan support makes it easy cleaning. Recessed controls. Supplied with hole for tap (39mm) not supplied. See our Part No. CCW 3149. Includes AC 540 siphon and seal. See More Info.
The Smev 8322 2 burner combination unit has an integrated heat-resistant safety glass lid, detachable chromed pot grids, enamelled burner caps, recessed controls, electronic 12 volt ignition, safety ignition system, AC 540 siphon, rubber seal, supplied with hole for tap (39mm) not supplied. See our Part No. CCW 3149. See More Info. for details.
The Smev 9222 right hand 2 burner combi sink unit has 2 ingrated heat-resistant safety glass lids, detachable chromed pot grids, enamelled burner caps, recessed controls, electronic 12v ignition, safety ignition system, AC 540 siphon, rubber seal, supplied with hole for tap (39mm) not supplied. See our Part No. CCW 31475. See More Info. for details.
The Smev 9222 left hand 2 burner combi sink unit has 2 ingrated heat-resistant safety glass lids, detachable chromed pot grids, enamelled burner caps, recessed controls, electronic 12v ignition, safety ignition system, AC 540 siphon, rubber seal, supplied with hole for tap (39mm) not supplied. See our Part No. CCW 31475. See More Info. for details.
The Dometic Smev 9722 sink and hob combination unit provides a stylish and compact solution for caravan and motorhome making the most out of minimal space. With a double burner hob and the option of having the sink on the right or left this versatile combination unit is finished with heat resistant glass lids which can be used as an extra work surface when the Dometic Smev 9722 hob is not in use.
USB LED Dimmerable Flexible Light, Touch Control, 3 Level Dimming. Length: 425mm
Colour Black or White
he highly portable Dometic 966 Portable camping Chemical Chemical Toilet provides comfort, safety and high quality, reliable features for complete, enhanced hygiene and is ideal for camping trips, caravans and motorhomes.
See More Info
A portable and convenient lightweight toilet that is perfect for smaller vehicles and tents due to the unique space-saving design. The push-button technology makes it easy to use and will always ensure a powerful and hygienic flush with less pump and less mess. The toilet has a waste holding tank capacity of 9.8L.
See More Info.
A portable and convenient lightweight toilet that is perfect for smaller vehicles and tents due to the unique space-saving design. The push-button technology makes it easy to use and will always ensure a powerful and hygienic flush with less pump and less mess. The toilet has a waste holding tank capacity of 18.9L.
See More Info.
Portable Toilet with a 10 Litre Waste Tank. A portable and convenient lightweight toilet that isperfect for smaller vehicles and tents due to the unique space-saving design.It aslo features a 12ltr fresh water tank and no external connections are required.
Portable Toilet with a 20 Litre Waste Tank. A portable and convenient lightweight toilet that is perfect for smaller vehicles and tents due to the unique space-saving design.It aslo features a 12ltr fresh water tank and no external connections are required.
MPK Multidirectional rooflight with opaque, flexible double skinned dome, which allows free air flow with dome closed. Telescopic arms allow vent to be opened to any side. Complete with removable flynet. Aperture size 280mm x 280mm.
MPK Replacement dome for CCV 5000 Roof Vent 280mm x 280mm, complete with telescopic arms. Available in white or beige.
MPK flynet, suitable for some 280x280 rooflights. Colour White or Beige.
Measures 275x275mm across the frame, and 275x285mm including the fixings.
