AL-KO one shot axle nut, suits 1637 and 2051 hub drums, 32 mm across flats. These nuts MUST NOT be reused, always fit new nuts, and torque to 290 Nm.
Sold as x1, x2, x4 and x6.
AL-KO one shot axle nut, suits 2361 hub drums, 36 mm across flats. These nuts MUST NOT be reused, always fit new nuts, and torque to 290 Nm.
Sold as x1, x2, x4 and x6.
Axle / Hub nut with 32mm measurment across the flats. Pack of 2.
Knott single use nut, fits all Knott - Avonride braked hubs and some unbraked, when fitted with sealed for life bearings. These nuts MUST NOT be reused always fit new nuts and torque to 290 Nm. See More Info.
Pair of castlated axle nuts with split pin and washer, 5/8 ins UNF, a very popular nut used on most suspension units and axles upto 750 kg. See More Info.
Hair dryer which plugs directly into a cigarette lighter type socket. 12 volt.
Hair straightener which plugs directly into a cigarette lighter type socket. 12 volt.
Travel kettle with water level gauge. Plugs into cigarette lighter type socket. Compact design. 12 volts (not mains). Design may vary.
Powerful compact vacuum cleaner 12V/150W. 4m long cable. Accessories: 180° revolving heads, brush attachment, crevis tool and extension pipes.
12 volt interior big 6" oscillating metal cooling fan. This fan is perfect for use within a car, van, caravan, motor home, or boat. This would make a great addition to cool you and the family on those hot days out, or whilst driving from location to location. Simply plugs into your existing cigarette lighter socket.
Thirlemere Cordless Kettle 1.2L 240v 750w Capacity. 1.2 Litres.
The Powerpart Range of Thirlemere Kettles are designed specifically for use in Caravans, Camper Vans, Motorhomes, etc.
Thirlemere Cordless Kettle 1.2L 240v 750w Capacity. 1.2 Litres.
The Powerpart Range of Thirlemere Kettles are designed specifically for use in Caravans, Camper Vans, Motorhomes, etc.
Thirlemere Cordless Kettle 1.2L 240v 750w Capacity. 1.2 Litres.
The Powerpart Range of Thirlemere Kettles are designed specifically for use in Caravans, Camper Vans, Motorhomes, etc.
Powerpart Thirlemere CHROME Cordless Kettle 1.2L 240v 780w- 900w.
Capacity. 1.2 Litres.
The Powerpart Range of Thirlemere Kettles are designed specifically for use in Caravans, Camper Vans, Motorhomes, etc
Low wattage 2 slice toaster, with wide toasting slots. Variable browning control with defrost, reheat and cancel buttons. Slide out crumb tray. 800 watt.
Low wattage 2 slice toaster, with cool wall housing. Variable heat control. 800 watt. Colour White or Black.
The PLS microwave oven has a low 700 watt output making it ideal for caravan and motorhome sites. The 17 litre capacity oven comes complete with glass turntable for even cooking, manual function button and manual timer button. Dimensions 452 mm height x 262 mm depth x 335 mm. Colour Silver.
Mini oil filled radiator 500 watt, with adjustable thermostat. Overheat and cut-outs means the radiator is incredibly safe, giving you peace of mind. Lightweight and portable, the radiator is easy to assemble and allows you to place it anywhere in your caravan or motorhome. See More Info.
Quartz low wattage 240 volt portable heater with two variable settings of 400 watt and 800 watt. Runs for as little as 3p/hour, with safety cut off switch and folding stand for easy storage. Built in carrying handle. Compact design. Length 330mm x Width 320mm x Height 180mm.
150 Watt Power Inverter converts 12 volt DC from car or leisure battery to 220 - 240 volt AC 50Hz to allow running of mains only appliances. Plugs into cigarette lighter type socket. Maximum continuous power 150 watts. With overload protection and low voltage warning and cut off.
300 Watt Power Inverter converts 12 volt DC from car, leisure battery or other high power portable 12 volt source to 220 - 240 volt AC 50Hz to allow running of mains only appliances. Maximum continuous power 300 watts. With overload protection and low voltage warning and cut off.
Skytronic 651.554 600 watt Power Inverter 12Vdc to 230Vac with reverse polarity protection. Output rating 230Vac @ 50Hz. Converts low voltage DC from vehicle, boat or caravan battery to a regulated 230Vac output voltage. Incudes low battery alarm, battery high/low shutdown, short circuit and overloiad protection and over temperature protection.
SUNSHINE SOLAR Power Inverter - 1000W - 12VDC. Input: 12 VDC. Output: 230 VAC. Power: 1000 W. Modified sine wave. Frequency: 50Hz. Peak Power 2000w
Pure sine wave inverter, converts 12 Volt DC to 230 Volt AC. Safety features protect against: reverse polarity, over & under voltage, low battery shut down, short circuit, overload and over temperature. 2 x 13A mains sockets, 1 x 2.1A USB connection. High speed cooling fan. Connects directly to battery.
Pure sine wave inverter, converts 12 Volt DC to 230 Volt AC. Safety features protect against: reverse polarity, over & under voltage, low battery shut down, short circuit, overload and over temperature. 1 x 13A mains sockets, 1 x 2.1A USB connection. High speed cooling fan. Connects directly to battery.
20m coil of Whale 60mm insulated warm air ducting pipe. 65mm exterior diamter, 60mm internal diameter.
Suitbale for all Whale ducting fittings DX6501-DX6536 used on most types od internal warm air heaters.
Whale 65mm Y duct fitting
Whale 65mm T fitting connector.
Whale 65mm straight duct connector
Whale 65mm end cap fitting.
Whale directional fitting vent. 30mm x 85mm x 65mm. Hole required 66mm. Suitable for use with DX6500 ducting.
Available in white or black or beige
Whale fixed fitting vent. 30mm x 85mm x 65mm. Hole required 66mm. Suitable for use with DX6500 ducting.
Available in white or black or beige
Whale Y branch ducting connector 90 x 90 x 65mm
Whale reducer allows a connection between 90mm and 6omm ducting in air heating systems. Useful when a secondary ducting route only allows the smaller pipe.
Whale Y piece ducting connector 90 x 90mm
Whale elbow ducting 90 x 90mm
Whale 90mm ducting connector joins two pieces of 90mm warm air ducting. Suitable for replacing a section of damaged pipe or to create an easy to remove joint in the system.
Whale 90mm air duct fixed grill
Whale ducting kit suitable for Whale heat air space heaters. See more info for breakdown of parts included.
Plastic clip to secure 65 mm diameter air duct, recommended spacing 30cm apart.
Air ducting tube VR 72 mm diameter, use clips CAS 99022 to secure tube if required. 5 Metre Roll.
Plastic clip to secure 72 mm diameter air duct, recommended spacing 30cm apart.
Air ducting tube VR 80 mm diameter, use clips CAS 99033 to secure tube if required. Sold in standard length of 2 Metres.
Plastic clip to secure 80 mm diameter air duct, recommended spacing 30cm apart.
Insulated waterproof air ducting tube DRI 75 mm diameter, use clips CAS 99033 to secure tube if required. Sold in standard length of 2 Metres.
Air ducting tube ZR 18 49 mm diameter, use clips ZRS 18 to secure tube if required. Price per Metre. Cut lengths cannot be returned.
Air ducting tube AZR 22mm diameter, use clips AZS to secure tube if required. Price per Metre.
Air ducting Tee connection TS suits 65 mm or 72 mm ducting tube. Colour agate grey.
Air duct Tee fitting LT, suit both 65 mm and 72 mm ducting tube. Colour agate grey.
Air ducting end nut EM, suit 65 mm diameter ducting. Colour agate grey,
Air duct extended end outlet EN-L, suits thicker walls and shaped furniture up to a maximum of 43 mm, when using T LT , end outlet nut EM, and 65 mm dia ducting. Colour Black.
Air duct Lamella insert LA, attaches to end outlet EN-O, direction of air flow is adjusted by turning. Choice of colour.
Air ducting Y connection, suits 65 mm or 72 mm ducting tube. Colour Agate Grey.
Air ducting straight connector, suits 65 mm or 72 mm ducting tube. For joining 2 ends of ducting tube. Colour agate grey.
Air duct elbow connector, suits 65mm ducting. Colour Black.
Truma male & female dutcing elbow.
Originally designed to push directly into the Truma combi boiler outlets so you can have your flexi 60/65mm ducting coming out of the boiler as an elbow.
Truma circulation air intake grill for Truma air conditioning units. External size 380mm x 230mm. Cut out size 350mm x 190mm.
Shut off slider control for warm air ducting system.
Truma air duct shut off valve to control air flow.
Truma particle filter for the Saphir Comfort, Saphir Vario and Saphir Compact air conditioning unit. Filters the air prior to cooling and distribution.
Truma Frostair sound muffler for installing in the cold air system of air conditioning equipment for additional noise reduction in the living area. You can make your cooling system even quieter by using Truma sound mufflers. Using just one reduces air flow noise within the interior by 50%. Using two reduces it by an amazing 90%! Suitable for: Saphire compact, Saphire comfort, Saphire vario, predecessor model Frostair.
Truma Saphir remote handset will switch the unit on and set the desired room temperature.
Blanking plug in agate grey for closing a warm air outlet, will fit 65mm ducting.
Truma wall fan outlet in agate grey, for 65 / 72mm pipes.
Whale Watermaster High Flow 921 replacement pump, complete with hose. For inlet socket see Part No. CCW 1000 or CCW 1002.
Whale Superfil 80 pump is an easy and convenient way to fill caravan or motorhome inboard water tanks and cassette toilet tanks, from an external water supply. Simply drop the pump into the water, plug in and fill.
.jpg "CASS 3015 Whale Submersible Portable Pump Kit GP1642")
The Whale GP1642 kit is a versatile portable pumping solution for washing down your caravan, motorhome, boat or car. Use as a portable shower or fill inboard tanks as the low voltage, high flow pump gives excellent performance making it suitable for cold or warm water. Complete with easy to maintain, wipe clean 3.75 metre (12.5 ft) hose and nozzle, plus 3.75 metre (12.5ft) cable with battery clips and cigar lighter connector.
The Watermaster IC Intelligently Controls the submersible pump, for trouble-free operation and peace of mind.
Stops the pump pulsating at high voltages and the pump running continuously at low voltages. Detects when the water container has run dry and turns pump off.
Whale Truma/Carver Crystal II & Compact compatible replacement High Flow water pump, complete with hose.
Whale Aquasmart plug & pip assembly vcomes complete with silverised carbon filter to remove unpleasant tastes and smells from your water for 3000 litres of water.
Maximum pressure 4 bar (60 psi)
Whale Watermaster Easi-Press Plug 12 volt submersible pump assembly is designed for the Truma Ultraflow water housing. Maximum flow rate 16 litres per minute. Top performance pump suitable for microswitch or pressurised systems high quality dust cover which holds shape over time and prevents debris entering. Incorporates an anti air-locking pump enhancing the performance of the Whale water system. The easily replaceable pump that can be removed and replaced if necessary. Easy fit plug stays secure. Protective plug cover ensures seal is covered when stored.
Whale easi press plug & pipe assesmbly complete with filter. Exterior water connection for use with water systems featuring onboard pumps. Simple to install and compatible with Truma Ultraflow sockets.
Silverised carbon filter removes unpleasant tastes and smells from 3000 litres of water, simply twist to replace with new.
Handy hose holder keeps pump off the ground while refilling water
Truma Ultraflow pump assembly with ergonomically shaped pistol grip is plugged into the filter or compact housing. 800mm hose. For inlet socket see Part No. CCG 2721 or CCG 2722.
Al-Ko B1600-3 Complete axle assembly
Single Axle - 618419
Twin Axle - 618795
Sent directly from Al-Ko, so please allow up to 3-4 weeks for delivery.
Storm Kit Awning Tie Down kit comes complete with 3 x 3 metre heavy duty straps with D rings along with 3 x 15 heavy duty pegs allowing you to secure the front corners of your awning along with the centre section to hold down secure during stormy/ windy weather.
Get ready for those strong winds with this awning tie down kit which has reflective bands. Suitable for awnings up to 7.5 metres.
Porch tie down kit for securing your porch awning during windy condition.
PRE-ORDER for March 2022
Falcon air porch awning with 150D lightweight performance fabric which can be pitched in just 10 minutes.
Suitable for vehicles with a fitting height of 235 - 250cm.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon air porch awning with 150D lightweight performance fabric which can be pitched in just 10 minutes.
Suitable for vehicles with a fitting height of 235 - 250cm.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon air porch awning with 150D lightweight performance fabric which can be pitched in just 10 minutes.
Suitable for vehicles with a fitting height of 235 - 250cm.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon air drive away awning with 150D lightweight performance fabric which can be pitched in just 15 minutes.
Suitable for vehicles with a fitting height of 180 - 210cm.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon air drive away awning with 150D lightweight performance fabric which can be pitched in just 15 minutes.
Suitable for vehicles with a fitting height of 240 - 270cm.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon Airshield windbreakers are a fantastic way to block out wind and give you privacy.
The single panels allow you to customise the length of the windbreaker so you can either add panels to cover more space or remove them for smaller areas.
With quick and easy setup the Falcon Airshield can be pitched in under 5 minutes with one person or 3 minutes with two people.
For dimensions and more info please see below.
PRE-ORDER for March 2022
Falcon Airshield windbreakers are a fantastic way to block out wind and give you privacy.
The three panelled windbreaker allows you to quickly and easily add cover to your campsite. The modular design allows you to increase the breaker to any size.
With quick and easy setup the Falcon Airshield can be pitched in under 5 minutes with one person or 3 minutes with two people.
For dimensions and more info please see below.
Awning rail lubricant is an especially formulated for caravan awing rail, non greasy silicone based product which makes awnings much easier to thread through the awning rail. Handy 100ml spray bottle.
With the W4 awning rail spreader you simply insert it into the awning rail and tap through any troublesome areas. The compact head is especially effective on awkward corners.
W4 awning rail brush is useful for cleaning or lubricating awning rail.
All you need to keep your awning rail in tip-top condition. Kit includes awning rail lubricant, awning rail spreader and awning rail brush, all in a handy storage bag.
Fiamma F451 / F45Ti 3m - 4.5m awning arm. Please refer to diagram for the correct arm.
Left Hand: 05577A01
Right Hand: 05577A01A
This is a special order piece and as such is non-returnable, so please ensure you are ordering the correct part
Arm for Fiamma F45I, F45Ti 3m-4.5m
Please choose left hand or right hand arm
Please note, that due to the size of the item additional couriers charges must be paid, unless you wish to collect the item from us.
Fiamma leg top for awning 2.5m - 3.5m
Fiamma leg knuckle for awning 2.5-3.5m. Please choose left hand or right hand version.
Fiamma foot plate for F45, F70, F65 awning. Please choose left hand or right hand version.
Fiamma outer end cap for F45Ti in polar white. Please choose left hand or right hand version.
WE ARE ABLE TO SUPPLY NEW REPLACEMENT AXLES FOR ALL MAKES OF TRAILERS AND CARAVANS, DUE TO THE VARIETY OF SIZES AND SPECIFICATIONS THEY ARE ALL SPECIAL ORDER ITEMS. WE WILL NEED TO KNOW MAKE / MODEL / YEAR AND THE INFORMATION OFF OF THE MANUFACTURERS ID PLATE WHICH IS RIVETED ON THE MIDDLE PART OF THE AXLE. SPECIAL BESPOKE AXLES MADE TO ORDER. AL-KO axles - KNOTT axles - BPW axles - PEAK axles - AVONRIDE axles ARE ALL AVAILABLE, PLEASE CONTACT OUR SALES TEAM FOR ANY FURTHER ASSISTANCE ON 01926 640489
We offer a professional axle repair service for caravans, motorhomes and trailer axles. Re-rubbering £650.00 inc vat and collect and return to your address (UK Mainlland). Torsion bar repair and re-bushing POA.
Door to door collection and delivery typically within one week.
See More Info before ordering.
We offer a professional axle repair service for caravans, motorhomes and trailer axles. Axle repair and re-rubbering service (including torsion bars) including vat and collect and return to your address (UK Mainland).
An image of your axle plate is required to get a personalised price.
12 volt 21 watt single contact, single element bulb. 15mm diameter cap, used for INDICATOR - FOG or STOP light. (SINGLE CONTACT)
12 volt 21/5 watt bulb for stop & tail light. Double contact, double element bulb. 15mm diameter base.
12 volt 21 watt double contact, single element bulb. 15mm diameter cap, used for INDICATOR - FOG or STOP light. (DOUBLE CONTACT)
12 volt 21 watt amber indicator bulb. Single contact, single element bulb. 15mm diameter base.
12 volt 21 watt amber indicator bulb for Caraluna lamps. Single contact, single element. 15mm diameter base, Offset pins.
12 volt 5 watt marker bulb. Single contact, single element. 15mm diameter base.
12 volt 4 watt single contact, single element bulb.
12 volt 5 watt bulb with capless base. For side/tail lights.
12 volt 10 watt single element, single contact bulb. 15mm diameter cap.
12 volt 5 watt festoon bulb. Used in number plate lamps and side marker lamps.
12 volt 10 watt festoon bulb. Used in interior lamps and awning lamps.
12 volt 18 watt festoon bulb. Used in awning lights.
12 volt 10 watt halogen bulb with G4 (2 pin) base. Used in interior spotlights. Pack of 2. Avoid handling this bulb when fitting. Use plastic sleeve provided.
Ideal halogen replacement. Works on 12v, non-dimmable and equivalent to 19W in a warm white.
Pack of 2.
12 volt 20 watt halogen bulb with G4 (2 pin) base. Used in interior spotlights. Pack of 2. Avoid handling this bulb when fitting. Use plastic sleeve provided.
12 volt 10 watt MR11 dichroic bulb. Used in Zoe lights.
12 volt MR11 base multi faceted reflector bulb. Gives lower energy consumption. 2 Watt 100 Lumen.
12 volt 21 LED bulb. MR16 base. Gives lower energy consumption.
230 volt GU10 21 LED bulb. Gives lower energy consumption.
Status MR16 Bulb twist and lock GU10 base for mains use. 450 lumens, 6 watt power equivalent to 63 watts. See More Info.
FIAMMA CARRY BIKE INTERNAL BRACKET COVER (2) - 98656 - 276
Pack Of 2
Cover plates to fit Fiamma bike rack, without Fiamma branding
Pack of 6 screw caps & covers for fitting wheel arches etc.
6 x off white plastic.
20mm overall diam.
12mm diam cut size.
Plastic grab handle, black polypropylene with 2 fixing concealed holes (See More Info), overall length 170 mm, width 28 mm, height 40mm. Hole fixing centres 137mm. Colour Black.
Plastic grab handle, black polypropylene with 2 fixing holes, overall length 208 mm width 29 mm and height 45mm. Hole fixing centres 165mm. Colour Black.
Rigid plastic grab handle with 2 fixing holes, overall length 245mm, width 25mm . Hole fixing centres 203mm/8inches. Colour Black.
Polyester coated die cast grab handle, with rubber core comfort grip. Length 164mm, width 43mm and height 45mm. Hole fixing centres 150mm. Grey.
Chrome plated die cast grab handle. Length 195 mm. Hole fixing centres 150mm. Fixing hole diameter 6mm. Overall height 46mm.
Nylon door retainer, holds caravan door back when open. Hole fixing centres 35mm. Colour white.
Sturdy spring loaded retainer suitable for worktops, sink tops and most locker doors made of white plastic and requires to be screwed into place (we recommend also using a strong adhesive as well) and screws are not included.
Often used in our workshop to hold locker doors.
Plastic door retainer, holds caravan door open. Fixing hole centres 32mm. Colour White.
Veneta door retainer, used to securely hold your caravan door open. Fixing hole centres arm 45mm - base 30mm. Colour White.
Viva door retainer, with sprung loaded action. Fixing hole centres arm 40mm - base 60mm. Colour white.
Extended Viva door retainer, without spring loaded action. Fixing hole centres arm 40mm - base 60mm. Colour Off White.
Lever release barrel door retainer. See Spec. for further image. Colour Black, White or Grey
Single axle brake cable balance bar, for use with AL-KO cables.
Tandem axle brake cable balance bar for use with AL-KO cables.
Single axle balance bar for use with Peak cables with clevis ends, complete with cotter pins.
Tandem axle balance bar for use with Peak cables with clevis ends, complete with cotter pins.
Tandem axle brake cable balance bar for use with Knott type cables with threads on ends.
Budget single axle brake cable balance bar for use with Knott type cables with threaded ends.
ALKO brake shoe kit 160 x 37 , 1 axle kit contains 4 brake shoes, 4 springs and plates. ALKO brakes are used on most Caravans and many Trailers. See More Info.
Please Note: 2 dust caps, 2 flanged nuts are no longer included in these kits
MP1766B Maypole Brake Shoe Axle Set for ALKO 160×35 Drums. Replacement for ALKO 160 x 35mm brake drums. Essential trailer servicing - Contents mirror equivalent OEM models, include 4 brake shoes, 4 retaining springs & cover plates, 2 short adjuster springs, 2 long tensioning brake springs.
ALKO brake shoe kit 200 x 51 , 1 Axle kit contains 4 Alko brake shoes, 4 springs and plates. ALKO brakes are used on most Caravans and many Trailers. See More Info.
Please Note: 2 dust caps & 2 flanged nuts are no longer included in these kits.
MP1767B Maypole Brake Shoe Axle Set for ALKO 200×50 Drums. Replacement for ALKO 200 x 50mm brake drums. Trailer Servicing Essential. Contents mirror equivalent OEM models, 4 brake shoes, 4 retaining springs & cover plates, 2 short adjuster springs, 2 long tensioning brake springs.
ALKO brake shoe kit 230 x 61 , kit contains 4 Alko brake shoes, 4 springs and plates. ALKO brakes are used on most Caravans and many Trailers. See More Info.
Please Note: 2 dust caps, 2 flanged nuts are no longer included in these kits.
MP1768B Maypole Brake Shoe Axle Set for ALKO 230×60 Drums. Replacement for ALKO 230 x 60mm brake drums. Trailer Servicing Essentials. Contents mirror equivalent OEM model, 4 brake shoes, 4 retaining springs & cover plates, 2 short adjuster springs, 2 long tensioning brake springs
This Brake Shoe Kit will fit KNOTT brake drums with 160mm diameter and 35mm wide brake shoes. This kit is for Axles manufactured from 1990 onwards (if you are unsure if these will fit your brake drums please compare your existing brake shoes with the image above, particularly the shoe without the spring as this shoe is a noticeably different shape) See More Info:
These are Genuine KNOTT Brake Shoe Kits, not poor quality copies.
We recommend that brakes should always be changed as a complete axle set.
MP1761B Replacement for Knott, 160 x 35mm, Auto-Reverse brake drums, including Ifor Williams.
Contents mirror equivalent OEM models, 2 fixed brake shoes, 2 sliding brake shoes, 2 retaining springs, 4 tensioning springs (2 long, 2 short)
This Brake Shoe Kit will fit KNOTT brake drums with 203mm diameter and 40mm wide brake shoes.
This Genuine KNOTT Brake Shoe Kits services one complete axle. See More Info
We recommend that brakes should always be changed as a complete axle set.
MP1762B Maypole Brake Shoe Axle Set for Knott 200×50 Drums. Replacement for Knott, 200 x 50mm, Auto-Reverse brake drums, including Ifor Williams.
Contents mirror equivalent OEM models, 2 fixed brake shoes, 2 sliding brake shoes, 2 retaining springs, 4 tensioning springs (2 long, 2 short)
KNOTT 200mm x 50mm Auto Reverse Brake Shoe Axle Kit
Knott brake shoes 200 x 50 auto reverse trailer and caravan brake shoe axle set, includes 4 Knott brake shoes and 2 FREE sets of return springs. A popular brake fitted to trailers and caravans. (fitted to many models of Ifor Williams trailers manufactured after Sept 1992)
This Brake Shoe Kit will fit KNOTT brake drums with 200mm diameter and 50mm wide brake shoes.
These are Genuine KNOTT Brake Shoes, not poor quality copies. See More Info
We recommend that brakes should always be changed as a complete axle set.
MP1763B Maypole Brake Shoe Axle Set for Knott 203×40 Drums. Replacement for Knott 200 x 50mm, Auto-Reverse brake drums. Trailer Servicing Essential.
Contents mirror equivalent OEM models, 2 fixed brake shoes, 2 sliding brake shoes, 2 retaining springs, 4 tensioning springs (2 long, 2 short)
KNOTT 250mm x 40mm Auto Reverse Brake Shoe Axle Kit
Knott brake shoes 250 x 40 auto reverse trailer brake shoe axle set, includes 4 Knott brake shoes and 2 FREE sets of return springs. A popular brake fitted to trailers and caravans.
A popular brake fitted to trailers and caravans. (fitted to many models of Ifor Williams trailers manufactured after Sept 1992)
This Brake Shoe Kit will fit KNOTT brake drums with 250mm diameter and 40mm wide brake shoes.
These are Genuine KNOTT Brake Shoes, not poor quality copies. See More Info
We recommend that brakes should always be changed as a complete axle set.
MP1764B Maypole Brake Shoe Axle Set for Knott 250×40 Drums. Replacement for Knott 250 x 40mm, Auto-Reverse brake drums. Trailer Servicing Essential.
Contents mirror equivalent OEM models, 2 fixed brake shoes, 2 sliding brake shoes, 2 retaining springs, 4 tensioning springs (2 long, 2 short)
This Knott Auto reverse Brake Shoe Kit will fit KNOTT brakes drums with 300mm diameter and 60mm wide brake shoes.
These are Genuine KNOTT Brake Shoe Kits, not poor quality copies. See More Info
We recommend that brakes should always be changed as a complete axle set.
See More Info.
BPW Brake shoe 200x50 axle set, complete with springs and clips. Genuine BPW brake parts. A popular brake fitted to trailers and caravans. 09.801.03.79.0. See More Info.
BPW trailer brake shoe 250x40 axle set, complete with springs and clips. Genuine BPW brake parts. A popular brake fitted to trailers and caravans. 09.801.03.80.0. See More Info.
BPW brake half shell.
BPW part no: 03.338.05.04.0
These shells are fitted to trailers and caravans with BPW brakes.
BPW brake cable eye for use on quick release cables.
BPW part no: 03.396.12.02.0.
Al-ko part number 4017078
These cable eyelets are fitted to trailers and caravans with BPW brakes. Fitted to BPW S1704-7rask, S2005-rask and S2504-7rask auto reverse brakes.
AL-KO brake expander, used with 160 x 37 brake shoes, this is a requirement when fitting new shoes to axles manufactured before 93/94. A popular brake fitted to trailers and caravans.
AL-KO brake expander, used with 2051 and 2361 brake shoes. A popular brake fitted to trailers and caravans. (fitted to most models of Ifor Williams trailers manufactured before Sept 1992). 571510
Al-ko brake cable eye for use on quick release cables.
Al-ko part no: 604262
These cable eyelets are fitted to trailers and caravans with Al-ko brakes after 1989.
AL-KO brake aduster assembly, suits 1637 series brakes. A popular brake fitted to trailers and caravans. 387706
AL-KO brake aduster assembly, suits 2051 and 2361 series brakes. A popular brake fitted to trailers and caravans. 387323
ALKO Auto Reverse tension pull off spring, fits 2051 and 2361 brake assemblies. It ensures the auto reverse lever returns to its normal position .
The spring often fail after the brakes have got hot making them stretched and floppy.
Cable shroud for AL-KO brake cables, provides cable location at the back plate cable entry point. A popular brake fitted to trailers and caravans. (fitted to most models of Ifor Williams trailers manufactured after Sept 1992)
Knott brake expander for 203 x 40 - 200 x 50 and 250 x 40 auto reverse brakes. A popular brake fitted to trailers and caravans. (fitted to most models of Ifor Williams trailers manufactured after Sept 1992)
Cable shroud for Knott brake cables, provides cable location at the back plate cable entry point.
Fitted to 160 X 35 Mk 3,203 x 40, 200 x 50, and 250 x 40, Knott auto reverse brakes.
Knott 160 x 30 mk3 brake shoe return spring kit, includes 2 x auto reverse springs, 2 x tension springs, 1 x retaining spring.
Brake spring set for Knott 203 x 40 brake set.
For drums that are 203mm and shoe width of 40mm, if your shoe width is 50mm please look at related products
Knott part number 520049
Sold in wheel sets, Includes, 2 x auto reverse springs, 2 x tension springs, 1 x retaining spring
Brake spring set for Knott 250 x 40 brake set.
For drums that are 250mm and shoe width of 40mm, if your shoe width is 50mm please look at related products
Knott part number 520050
Sold in wheel sets, Includes, 2 x auto reverse springs, 2 x tension springs, 1 x retaining spring
Knott brake adjustment wedge and bolt suits 160x35 - 203x40 - 200x50 brake assemblies.
Genuine brake spring set for Knott 200 x 50 brake set.
For drums that are 200mm and shoe width of 50mm, if your shoe width is 40mm please look at related products
Knott part number 520077
Sold in wheel sets. Includes: 2 x auto reverse springs, 2 x tension springs, 1 x retaining spring
Brake spring set for Knott 300 X 60 brake set.Complete axle set.
Knott part number 520078
Sold as axle sets. Includes: 4 x auto reverse springs, 4 x tension springs, 2 x retaining spring, 2 x retaining spring buckles
Knott brake cable eye for use on quick release cables. Knott part no: 45207 or 572014
These cable eyelets are fitted to trailers and caravans with Knott brakes. Fitted to 160 X 35 Mk 3,203 x 40, 200 x 50, and 250 x 40, Knott auto reverse brakes.
Alko 90S caravan coupling, hydraulically damped pressed steel coupling 700kgs - 1000kgs capacity. 50mm coupling head, suits auto reverse brake systems. Requires an additional clamp for jockey wheel.
This Mobicool U22 Passive Cool Box is a great design which has found the perfect compromise between size and capacity. With 23 litres of storage space inside, this cooler is still small enough to fit behind the passenger seat of your car, caravan or motorhome – perfect for picnics or days at the beach.
Inside you can fit large bottles and still have them standing up, so you can fit even more into your cooler and make the very most of the space.
The Outwell ECO cool box is smart in design and uses extra insulation for the reliable heat and cold conservation options. The interior ice pack divider boosts the cooling facility. Outwell ECO cool boxes comply fully with the requirements of the EU energy efficiency standards. Hidden and protected cable entry.
The Outwell ECO cool box is smart in design and uses extra insulation for the reliable heat and cold conservation options. The interior ice pack divider boosts the cooling facility. Outwell ECO cool boxes comply fully with the requirements of the EU energy efficiency standards. Hidden and protected cable entry.
The Mobicool MT48W is a portable coolbox from Dometic that can be run on a car battery or be powered by mains electricity (230 V AC) on campsites or within the user’s vehicle.
The coolbox has a generous 48-litre capacity and features two sturdy wheels, a pull-out handle and side handles for easy lifting. Its extra thick insulation, and robust outer casing means this MT48W model coolbox can cool down to 16 °C below the ambient temperature. The split-lid design helps minimise loss of cold air, while the removable inner divider and cable compartment allows the user to keep contents and cables organised.
Rubber bump stop for use with 5 ins springs, sold in pairs.
Rubber bump stop for use with 6 ins springs, sold in pairs.
Caravan site plug 240V 16 Amp 3 pin, connects to splash proof site electricity supply.
Caravan coupler plug, connects to mains inlet on caravan/trailer. 240V 16 amp, 3 pole.
Continental 2 pin connector plug.
Hook up adapter UK, enables a mains extension lead site plug to be connected to a 13 amp outlet.
Hook up adapter continental, enables a mains extension lead site plug to be connected to a continental 2 pin outlet.
Trailing 13 amp mains adapter/socket.
This Mains Converter Lead easily converts a Caravan mains lead to make it compatible with a standard 13 amp domestic Plug.
16 Amp plug to 2 x 13 Amp sockets. Ideal for caravans, motorhomes and generators 41cm length cable. British Standard BS1363/A
Flush fitting angled waterproof 240V mains inlet socket, fits flush onto side of caravan/trailer/motorhome. Size 100mm x 160mm. Colour White.
MPK mains inlet box with hinged lid, 16A - 240V, lid and pins available separately
MPK lid and 2x hinge pins for MPK mains inlet housing. CCE 4009 MPK
Flush fitting waterproof 240V mains inlet socket, fits flush onto side of caravan/trailer/motorhome. Colour Beige.
10x CCE 4010 Caravan Mains Inlet - Available in white, black or beige, or a mix of colours
Flush fitting waterproof 240V mains inlet socket, fits flush onto side of caravan/trailer/motorhome
External size: 107mm x 107mm, depth: 80mm
WHALE Socket Electric Mains In UK. The new Whale Mains Electric In Socket allows you to safely hook up 230V/16amp mains power to your caravan, motorhome or camper van while onsite. Slick design - uniform look on the vehicle's exterior walls. Comfortable to use. Waterproof protection. High quality satin finish UV stabilised to prevent damage from sunlight.
Flush fitting waterproof 240V mains inlet socket, fits flush onto side of caravan/trailer/motorhome. Colour Black.
Flush fitting waterproof 240V mains inlet socket, fits flush onto side of caravan/trailer/motorhome. Colour White.
Garage socket 3 pole, 16 amp outlet, nominal voltage 230V.
Flush fitting waterproof 240 volt mains socket for bringing electricity to the exterior of caravan / trailer / motorhome. Size 160mm x 100mm. Overall depth 100mm. Colour White or Beige.
