AL-KO Motorhome shock absorbers Heavy Duty with 16mm dia bolt holes, used on the larger Fiat Ducato, Peugeot Boxer chassis conversions. Hymer, Elddis, Swift etc. Sold separately but recommended they are fitted in pairs to ensure a stable safe ride. See More Info.
AL-KO Motorhome shock absorbers Heavy Duty with 16mm dia bolt holes, used on the larger Fiat Ducato, Peugeot Boxer chassis conversions. Hymer, Elddis, Swift etc. Sold separately but recommended they are fitted in pairs to ensure a stable safe ride. See More Info.
Universal rubber bellows/gaiters for trailer and caravan couplings with 5 folds.
60mm diameter, 120mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
These bellows fit most Al-ko 30s, 60s 90s,120s/SR, 250s and 101VB couplings .
35mm draw tube, approx 100mm long, 30mm round opening on the head end, 40mm opening on the other end.
May fit other couplings.
Alko gaiter to suit most Al-ko couplings fitted with a AKS 2004 or AKS 3004 stabiliser.
35mm-60mm draw tube, 80mm long, 35mm round opening on the head end, 55mm opening on the other end.
Rubber Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
35/55mm diameter, 80mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Alko gaiter suit 161S and 251S Alko couplings, All ALKO parts are available please ask.
Rubber Vented bellows with bolt cover for ALKO 161S / 251S couplings
54/49mm diameter, 125mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Coupling damper suitable for ALKO 60/90. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for ALKO 60/90 (including side spacer). Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 60S/2 , capacity 450kgs - 750kgs for coupling produced 1982 to 2001, All Alko spares available.
Alko coupling damper for 90S/2&3 Alko coupling, capacity 700kgs - 1000kgs for coupling produced after 1985 to current year, . All Alko spares available. See our Classic Caravan section for old and obsolete parts.
1x available
Alko coupling damper for 161S for coupling produced 1985 - 1988 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 161 Short (pre 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 161S, for coupling produced after 1989 to current year, Alko coupling 900kgs - 1600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x avaialble
Coupling damper suitable for ALKO 161 Long (post 1998) . Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1985 - 1989 Alko coupling, 1500kgs - 2600kgs capacity. All Alko spares available. See our Classic Caravan section for old and obsolete parts.
2x available
Coupling damper suitable for ALKO 251 Short. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
Alko coupling damper for 251S 1990 to current year Alko coupling 1500kgs - 2600kgs capacity.All Alko spares available. See our Classic Caravan section for old and obsolete parts.
Coupling damper suitable for ALKO 251 Long. Quality dampers from German manufacturer Stabilus.
See more info for dimensions.
AL-KO 131R Damper (1989 - current year). Couping no: ETI 811124, 750KG TO 1300KG.
Length: 525mm long. Tube width: 50mm.
Al-ko FA3.5 and SV 5.5 coupling damper. 2000KG TO 3500KG.
This damper is 380mm long. The tube across the end is 33mm long. and it has a thread
Al-ko 3000kg profi V cast coupling damper. 1600KG TO 3000KG.
Length: 360mm long, end is 60mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko Profi V 3500kg Damper, 2000KG TO 3500KG.
Length: 430mm long. Tube end: 81mm long.
The front of the damper is fixed to the drawtube with a rollpin, this can be found behind the plastic plug half way down the body.
Alko 120S STABILUS damper
Length: 340mm long bolt centre to bolt centre. Bolt holes are 10mm with rubber bushes
Alko 120 S SV SR damper.
Length: 400mm. Tube length: 215mm.
Alko 131R damper from 1985-1992
Length: 350mm. Tube length: 180mm. Hole centres are 325mm apart.
Alko rubber bush for the rear of a 150V or 200V damper.
This fits on the treaded end between two metal washers.
Thickness: 5mm, Centre hole: 10mm, Diamter: 21mm
This damper fits AL-KO 160SR and 200SR couplings
This damper is 340mm long bolt centre to bolt centre. The bolt holes are 10mm with rubber bushes
AL-KO 354001 Handbrake assembly AL-KO 90/S3 Couplings
Ratchet action handbrake for older 90/S3 couplings with spring cylinder energy store. Complete with breakaway cable and energy store bracket.
Alko nylon bearing bushes, for 161/s and 251/s coupling, the kit containes 1 - front bearing and 1 - rear bearing.
ALKO coupling damper fits SV 3.5 and FA 3.5 3500kg capacity coupling, complete with extension link.
1x available at reduced price, then price will increase to £199.95
Al-Ko chrome plastic aerodynamic cover
Al-ko AK 161 coupling head ( new generation up to 1600 kg )
Plastic soft grip handle, green indicator for correct coupling on to the vehicle and a visual wear indicator to the side.
This coupling head is for a 50mm ball and a 35mm, 45mm and 50mm ROUND draw tube.
Replaces the 35mm AK160 (with the use of the supplied spacer) and 50mm AK160 which are now obsolete,
Can also be used as a replacement for Knott 45mm (with the use of the supplied spacer) and 50mm pressed steel couplings up to 1600kgs
The bolt holes on the side are 50mm to 55mm apart and the front one is elongated.
1730218
Alko AK270 is a replacement for the AK300 version A coupling head, suits 251S couplings with 50 mm draw tube diameter. The handle consists of a solid metal core with an ergonomically shaped 2K plastic cover (soft touch). During operation, the hand is firmly attached to the handle, the shaped end of the handle serves as a slip guard. Provides protection against scratching and shin protection.
Knott-Avonride replacement pressed steel coupling head for 1300kg - 2000kg capacity coupling.
Knott-Avonride replacement cast coupling head for 1400kg - 2700kg capacity coupling. Complete with integral lock.
Knott-Avonride replacement cast coupling head for 2700kg - 3500kg capacity coupling. Complete with integral lock.
Alko safety breakaway cable with snap hook one end and crimp hook on the other, protective plastic coating, fits all ALKO couplings. It is a LEGAL requirement to have a breakaway cable fitted when towing within the EU
Knott-Avonride coupling damper AV13 for 750kg - 1300kg capacity coupling.
Knott-Avonride coupling damper AV20 for 1300kg - 2000kg capacity coupling.
Knott-Avonride coupling damper AV27 for 1400kg - 2700kg capacity coupling.
Knott-Avonride coupling damper AC35 for 2700kg - 3500kg capacity coupling.
This Damper fits trailers and Caravans with a Knott-Avonride coupling hitch.
Knott KFG 30 KRV30
Coupling damper suitable for Knott KF/KR13 C/D trailers. Quality over-run coupling dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for Knott KF/KR17-20 trailers. Quality over-run coupling dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for Knott KF27A/KFG30 (12mm) trailers. Quality over-run coupling dampers from German manufacturer Stabilus.
See more info for dimensions.
Coupling damper suitable for Knott KFG35 trailers. Quality over-run coupling dampers from German manufacturer Stabilus.
See more info for dimensions.
Knott-Avonride safety breakaway cable. Fits Knott / Avonride braked couplings and many other couplings.
Knott-Avonride coupling gaiter fits coupling up to 2700 kg capacity. Colour may vary red or black.
Knott-Avonride coupling gaiter, fits AC35 - 3500 kg coupling.
These bellows fit Avonride 3500kg couplings and Knott KFG 35 couplings. Also fitted to Ifor Williams 3500kg trailers with a Knott - Avonride coupling.
Rubber Bellows Bolt Cover,50/60/3 Folds suitable for Knott KF7.5-20 & KRV13-30 couplings.
60mm diameter, 135mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area
Rubber Bellows No Bolt Cover, 60/55/5 Folds. Suitable for vented bellows without bolt cover for Knott KFG13 to KFG30 couplings
55mm diameter, 140mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied
Rubber Bellows Without Bolt Cover, 75/75/4 Folds. Suitable for Knott KFG35 couplings with towing eye
75/75mm diameter, 140mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area
PVC Bellows for Knott KFG35 couplings with bolt 75/70/3 folds, widely used on Ifor Williams Trailers (P00873 / Knott 577005)
75mm diameter, 180mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area
The Alko Soft Dock is a manufactured from a soft and absorbent rubber compound which makes this coupling cover a great asset to shin protection whilst also reducing the risk of scratches to the towing vehicle. Can be used on ALKO coupling heads AK7, AK10/2 and AK252.
W4 Caravan 'A' frame cover in hard wearing breathable material is extended at the rear to protect the handbrake mechanism and 12N/12S plug storage ports. Easily fitted, giving maximum weather protection during the overwintering period. Colour white.
Pusher emergency release
BPW Coupling Damper fits
PAV-SR 1,3 BX - PX (coupling part number 48.27.x81.xxx)
ZAF1,35-1 (coupling part number 48.25.58x.xxx)
ZAAQ 1,6-1(coupling part number 48.25.181.xxx and 48.29.181.xxx)
>1300kg couplings
This genuine BPW/Alko damper fits ZAF 2,0-2 couplings with the part number 48.36.58x.xxx, 1500Kg to 2000Kg
One end has round tube 30mm long with a 12mm hole, the other is a rubber bush 30mm long, 24mm wide and 12mm hole.
The body is 175mm and has a rubber bush 30mm long, 24mm wide and 12mm hole. Overall length 330mm.
1x available
Fits BPW couplings with the part number 48.24.571.xxx and 48.24.171.xxx (GTA 1,2C)
One end has round tube fitted with a rubber bush the other is threaded
Overall length 560mm. The body is 310mm and has a rubber bush 30mm long, 24mm wide and 12mm hole.
Overall length 330mm.
BPW damper fits ZAF 1,0- 1 and 2 couplings with the part number 48.20.58x.xxx, 540Kg to 1000Kg
One end has round tube 30mm long with a 12mm hole. The body is 170mm and has a rubber bush 30mm long, 24mm wide and 12mm hole. Overall length 330mm.
BPW damper fits ZAF 1,5-2 couplings with the part number 48.27.58x.xxx, 750Kg to 1500Kg
One end has round tube 30mm long with a 12mm hole. The body is 170mm and has a rubber bush 30mm long, 24mm wide and 12mm hole. Overall length 330mm.
BPW damper fits:
PAV-SR 1,3 BX - PX (coupling part number 48.27.x81.xxx)
ZAF1,6-1 (coupling part number 48.27.58x.xxx)
>1300kg couplings
One end has round tube 30mm long with a 12mm hole. The body is 185mm and has a flat piece of metal welded to it 30mm long 5mm thick 24mm wide. Overall length 355mm.
BPW damper fits 1600kg couplings.
One end has round tube 20mm long with a 12mm hole. The body is 180mm and has a flat piece of metal welded to the end 30mm long, 5mm thick, 24mm wide, with a 8mm hole in it. Overall length 350mm.
BPW damper fits 2000kg couplings
One end has round tube 20mm long with a 12mm hole. The body is 180mm and has a flat piece of metal welded to the end 30mm long, 5mm thick, 24mm wide, with a 8mm hole in it. Overall length 350mm.
Genuine BPW couplig gaiter / gaiter fits the PAV SR AS light capacity range of couplings.
Genuine BPW coupling bellows / gaiter fits the PAV SR range of couplings.
Albe Insert lock for Albe couplings, complete with 2 keys.
Alko insert lock, fits Alko AK7, AK9 and Alko AK10/2 couplings. Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys
ALKO Replacement integral lock for all alko hitch locks, including Type1 ET1. Easy to replace, and come with fitting screws and 2 keys. Fits the popular 811202 security device. Our Part Nos CSD 3012 and CSD 3013.
Integral lock for the Alko AKS 1300 Stabiliser. Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys.
Can be cut to match existing old system key.
Suitable for AK 30, 65 and AKS2000 , 2500 , 2700 stabiliser.
Locates inside keyhole shape on coupling handle. Once the key is removed, the insert stays inside the handle - this prevents the coupling mechanism from operating. Supplied with 2 keys.
This sturdy Alko Premium security device meets the highest international safety standards such as the criteria for the "Sold Secure Gold Standard" (UK). Fits AKS1300 stabilisers. The sturdy steel construction with powder-coated housing and a solid galvanised bolt (free of chromium (VI)) is supplied with 2 keys. See More Info.
Alko AKS 2700 security device fits Alko AKS 2000, AKS 2500 and AKS 2700 Stabilisers. It provides a substantial deterrent against the theft of the caravan and the stabiliser. Designed to lock over the coupling handle, and enabling the stabiliser handle to be lowered, the hitch lock can remain on your vehicle even when towing. When not coupled up, insert the safety ball within the coupling head before applying the hitch lock to prevent the caravan from being coupled to another vehicle. See More Info.
The new AL-KO Premium Security Device 3004 provides a substantial deterrent against the theft of the caravan and the stabiliser. Designed to lock over the coupling handle, and enabling the stabiliser handle to be lowered, the hitch lock can remain on your vehicle even when towing. When not coupled up, insert a safety ball (available separately CTB 3342) within the coupling head before applying the hitch lock to prevent the caravan from being coupled to another vehicle. See More Info.
Berdnes steel insert lock for 50mm Coupling, complete with 2 keys.
6x available
Bradley coupling head Lock-it insert, fits all Bradley heads with insert facility, complete with 2 keys.
Trailer Cop coupling lock, locks up inside the coupling head, suits most 50 mm couplings, complete with 2 keys.
Knott-Avonride coupling head lock, suitable for cast head couplings, complete with 2 keys. This lock fits Knott-Avonride couplings with the lock in the top of the flipper. Also fitted to Ifor Williams trailers with a Knott - Avonride couplings.
Alko compact and sturdy universal 50mm towball coupling lock. This ALKO coupling lock most standard ALKO coupling heads, braked and unbraked.
Stronghold Strongbox coupling lock fits Alko heads with open handled, pressed steel hitches. Features an anti-drill high security lock and anti-prising lip. Highly visible deterrent. Lightweight and user friendly, it comes with it's own robust storage case.
Stronghold hitchlock for us on ALKO AK130, AK160, AKS1300, AKS2004, AKS3004 and AKS3504 couplings. Sold Secure tested and approved at Caravan Gold Standard. Easy to fit hitched or unhitched in seconds. Highly visible deterrent. Comes with a handy storage case and steel ball for extra security when fitting unhitched. Supplied with 3 keys.
Maypole Alko hitch lock suitable for AK130, AK160, AKS1300, AKS2004 and AKS3000. Designed so that the hitch lock can be fitted with the caravan hitched to the towing vehicle or unhitched as required. A strong, robust and highly visible deterrent. Insurance Approved. See More Info.
Bulldog dust cap 38mm. Keeps the locking bolt on your Bulldog hitchlock free from dust and dirt which could damage the locking mechanism.
2x available
Spanner specially produced for use on Bulldog Titan and Bulldog Centaur Wheel Clamps.
1x available
Bulldog arm adjustment screws for Bulldog Centaur Wheel Clamp and chock plate fixing screws for Bulldog QD Wheel Clamp.
2x availble
Fold down security post, 60 mm square. Distance above ground 570 mm and below ground 250 mm. Complete with disc padlock and 2 keys.
Removable security post in high visibility yellow. All steel construction designed for concreting into the ground, removable for access. Close shackle lock and keys provided. Ideal for driveways. For dimensions see More Info.
The Salino roatry push lock is flush fitting when closed and is fitted to many Chausson motorhome and caravan garage and storage doors.
Supplied with replacement lock barrel included but not fitted in case you wish you use your own.
Replacement MC keys all numbers from 1 to 80, sold in pairs - please state key number required in comments box at checkout.
West Alloy Snake Cut Lock Kit, Contains: High security snake cut barrel with one flip out key and one moulded key.
Replacement key for WD 1-199 barrels - please state key number required in comments box at checkout.
Replacment WD 1-199 barrel short tang & two keys - please state key number required in comments box at checkout.
West Alloy WD 1-199 barrel & two keys - please state key number required in comments box at checkout.
West Alloy long tang barrel & Keys. Suitable for CSD 3307 & CSD 3308
West Alloy lock assembly comeplete with two WD keys.
West Alloy lock assembly without barrel & keys, suitable for CSD 3305 where a specfic key number is required to match existing keys.
West Alloy WD barrel remover tool used to remove keylock barrel from the lock housing without damage.
Caraloc 700 complete two part replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Caraloc 700 exterior handle only. Suits CSD 3405 barrel lock.
L: 100mm, W: 70mm, H: 5mm.
Replacement barrell and keys to suit Caraloc 400 & 700.
Caraloc 400 complete two part replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Caraloc 400 exterior only handle. Suits CSD 3405 standard barrel lock.
L: 156.5mm, W: 76.2mm, H: 5.5mm.
Caraloc 640 replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Caraloc 640 replacement interior handle.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside the Caravan or Motorhome.
Caraloc 640 front and standard barrel
Rubber cavity fixer short. 12mm. Hole size 8mm. Pack of 2.
Caraloc 640 front with high secuirty barrel complete with four keys.
Caraloc replacement high security barrell complete with four keys to suit Caraloc 640 & 2000 locks.
For use with Caraloc 640 door lock to boost the number of combinations to over 1000. Supplied with 2 MC Keys
To replace Caraloc and WD standard barrels with a high security lock with over 1000 combinations. Comes with removal tool and 4 keys.
Caraloc 2000 replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on where the hinge is located on your Caravan or Motorhome Door when looking from outside of the Caravan or Motorhome
Vecam replacement exterior door lock, complete with 2 keys.
Left hand or right hand fitting available.
Fitting is based on the hinge location as viewed from the outside of your motorhome or caravan.
Vecam barrel and two keys, to suit CSD 3440 door locks.
Blank Vecam key suitable for cutting a copy from the orginal key.
(New 9000 series)
Zadi Vecam lock removal tool (9000 series) designed to help you reove a Zadi Vecam barrel used on a caravan or motorhome.
W4 external locker door lock assembly complete with 2 keys. Used by manufacturers including Swift and Explorer on external locker doors. See More Info. for dimensions.
Stay safe with the M shaped Fiamma Security S handle. While travelling Fiamma security handles take up little space when folded against the wall. They also serve as a useful handle to make entering and exiting the vehicle easier. They adapt to all doors opening both to the right or to the left. Complete with key lock safety release handle installation brackets screws internal counter-brackets. Painted aluminium construction. 30mm diameter and 2mm thick. Height 46cm. Less projection and less space between the handle grip and the vehicle, thus improving the entering into the vehicle.
Fiamma Security 31 device made from solid painted aluminium with 30mm diameter and 2mm thickness. It also serves as a conventional handle to make entering and exiting the vehicle easier. Adapts to all doors opening both to the right and to the left. See More Info.
Elegant security handle made of solid anondised aluminium, 30mm diamter, 2mm thick.
When closed to the door it works as an anti theft device and prevents accidental opening when travelling.
Also serves as a useful handle for entering and exiting the vehicle. Adpatable to all door when opening to right or left. Complete with key lock and saftey realease handle, installation brackets, screws and internal counter brackets.
Fiamma Security 46 Pro device made from solid painted aluminium with 30mm diameter and 2mm thickness. It also serves as a conventional handle to make entering and exiting the vehicle easier. Adapts to all doors opening both to the right and to the left. Special version of Security for motorhome doors or for applications where a strong structure is required. Made in light but solid aluminium. Colour white. Delivered with Kit Security Lock that offers major safety and strength thanks to a third fastening point on the door. See More Info.
W4 compartment lock assembly complete with 2 keys.
Replacement barrel lock complete with two WD keys and a handy tool for easy removal of the original barrel.
Replacement universal compression lock, complete kit with 2 keys, suits a wide range of applications.
W4 compartment lock cover keeps dirt and moisture out of the lock mechanism, avoiding rusting and malfunction.
2 in a pack
W4 replacement barrel lock complete with 2 keys. As used on Hartel Doors and Vecam lock assemblies.
The Alko safe is Designed for use in caravans & motorhomes and can be hidden under a bedbox or fixed into a wardrobe. With a double sided key and solid steel walls, you can relax knowing your valuables are secure.
SAS hitch lock can be used when hitched or unhitched to vehicle. Prevents car and caravan being separated in a car park or motorway services. Fits most AL-KO, Albe, and Harrison coupling heads. Covers coupling head and bolts. Fitted with high security, anti-drill radial pin tumbler lock, complete with 2 keys. Finished in Zinc pacifate and coated in bright yellow for visual deterrence and protection. Insurance approved.
SAS Fortress FORT hitch lock Fits Alko and Albe couplings and unbraked Knott. can be used when hitched or unhitched and features a maximum safe style security lock with twin locking pins which are hardened. It also has anti drill protection. Prevents your caravan being separated in a car park or motorway services. Insurance Approved.
SAS Winterhoff hitch lock fits both old and new Winterhoff stabilising hitches WS3000 models. (WW100+WW100B). High security heavy duty construction secures towing hitch and mounting bolts. Fitted with ultra high security lock. Covers coupling head and bolts. Insurance approved.
SAS Fortress 2 Gold hitch lock fits hitched or unhitched to Alko AK160, AK1300, AK2004/3004 stabilising heads and standard Alko hitch heads. Hardened steel body and locking bolt for maximum security and strength. Fully encloses hitchhead and bolts. Helps to prevents car and caravan being separated in a car park or motorway service station. Complete with aluminium case for storage when not in use. Insurance and Sold Secure approved.
SAS Compact Eagle hitch lock is a new budget priced security device from SAS which fits hitched or unhitched to ALKO AK160, AK300, AKS1300, AKS2004 and AKS3004 stabilising heads. Easy to fit and comes in plastic carry case. Insurance approved.
SAS Compact Condor hitch lock is a new budget priced security device from SAS which fits hitched or unhitched to Knott, Albe and Winterhoff couplings plus WS3000 and SSK I/II/III stabilising heads. Easy to fit and comes in a plastic carry case. Insurance approved.
SAS universal 916 hitchlock is designed for pressed coupling heads, Alko AK7, 160, 180 and 300 and Albe. Easy to fit in seconds and comes complete with 3 laser cut keys. The SAS universal 916 hitchlock helps to prevent your caravan being hitched up when unhitched from your vehicle.
Caravan Tracker sticker which reads "This caravan is fitted with mobile tracking". Size 110mm x 65mm.
Motorhome Tracker sticker which reads "This motorhome is fitted with mobile tracking" Size 110mm x 65mm.
Commonly used on locker door compartments. Very popular system. Comes complete with FAP new system barrel and 2 keys.
Available in black or white.
Commonly used on locker door compartments. Very popular system. Comes complete with FAP new system barrel and 2 keys.
Available in white or black.
Can be cut to match existing new system key.
Widely used Garage / Compartment lock in the market place. This lock is delivered with the new style barrel / keys. For door thicknesses of 8mm. Colour: Black.
Complete with metal handle and FAP new style barrel & 2 keys. Widely used in the market place. Black
Recent lock to the market place that's being used on many European Motorhomes. This cleverly designed lock means that just by touching it with your finger, will allow the lock to open.
Available in white or black.
Commonly used on locker door compartments. Very popular system. Comes complete with FAP new system barrel and 2 keys
Available in white or black.
Lock for Motorhome entrance doors. Widely used in the market-place. Lock is delivered with FAP new style barrel & 2 keys. Colour: Black.
Widely used and the way forward in lock styles. High security barrel with 2 keys, this lock is the one described as having "car style keys". High security as only FAP can cut these keys, hence impossible to copy.
Widely used and compatible with the FAP range of products that we sell.
Removes the FAP system barrel
Removes the new FAP system barrel
Removes the new FAP HSC system barrel
Widely used lock system seen on many motorhomes. Comes complete with FAP new system barrel and 2 keys
Widely used lock system seen on many motorhomes. Comes complete with FAP new system barrel and 2 keys.
Widely used lock system seen on many motorhomes. Comes complete with FAP new system barrel and 2 keys. Complete R/H lock assembly.
Widely used on motorhomes. Colour: White.
Widely used on motorhomes. Available in White or Black
This inner part is used by many motorhome manufacturers and used on various FAP lock sets.
Widely used motorhome lock assembly in white. Comes complete with FAP new system barrel and 2 keys.
Outer part only for lock system.Does not come with barrel and key. Works with either FAP new system barrel and keys or the HSC cylinder lock and keys.
Available as right hand or left hand.
Inner lock mechanism for M1 Pro Tek lock assemblies. Widely used on UK and continental motorhomes.
Inner lock mechanism for M1 Pro Tek lock assemblies. Widely seen in many UK and continental motorhomes. This lock has 2 plastic lugs on underside.
Outer lock mechanism only. Does not come complete with lock and keys. This lock takes either the FAP new style barrel and keys or the HSC cylinder lock and keys.
Available in white or black
Complete lock assembly as widely used by many UK and continental motorhomes. Complete with FAP new system barrel and 2 keys.
Widely used on UK and continental vehicles. Comes complete with FAP new system barrel and 2 keys
Widely used on UK and continental vehicles. Comes complete with FAP new system barrel and 2 keys.
Another widely used lock in the industry. Fitted to many types of motorhomes. Comes complete with FAP new style barrel and 2 keys.
Widely used lock system seen on many motorhomes. Complete with FAP new system barrel and 2 keys.
Available in white or black.
Widely used motorhome lock assembly. Comes complete with FAP new system barrel and 2 keys.
Available in white or black
Stronghold alloy wheel clamp fits 13" to 15" rims and 165mm to 205mm tyre sizes. Robust case hardened anti-saw steel construction. Easy fit onto security wheel bolt within 20 seconds. Sold Secure tested and approved at Caravan Gold standard and a high-visibility deterrent. Supplied with 10mm allen key, 3 keys and handy storage case. See More Info.
The ultimate lock for alloy wheels, the Stronghold Caravan Protector helps to prevents tow-away theft and unauthorised wheel removal. Sold Secure Tested, Gold approved and Insurance approved protection for your caravan. With it's patented high security locking system and robust hardened steel construction, it is still compact and lightweight (3.5kg). After the initial set up, it can be fitted in around 10 seconds. Kit contents: 1x replacement M12 x 1.5 x 22mm wheel bolt, 1x M12 x 30mm hexagon cap screw and key, 1x locking arm, 1x lock body, 1x lock assembly & 3 keys & 1x yellow lock cover cap. See More Info.
Adjustable pincer style wheel clamp designed to fit 175 - 225mm tyre width. Highly visible deterrent. See More Info.
Strongarm adjustable wheel clamp for use on steel wheels with 12" - 14" rims fitted with tyre sizes 155mm to 190mm. Ideal for caravans or trailers and easy to fit. Sold Secure tested and approved at Caravan/Trailer Gold standard and a high-visibility deterrent. See More Info.
Maypole heavy duty wheel clamp for wheel size 10" to 16" and tyre size 175 - 215mm. It features a high security, pick resistant lock and comes with 3 keys. The security plate prevents access to the wheel nuts and is fully adjustable. Weight 7.08kg. See More Info.
Carasafe SACA travel safe is ideal for keeping your mobile telephone, travellers cheques, cash or any other small valuable items safe and secure in your caravan or motorhome. The outer casing is easily mounted to the floor and the safe slides into position and is locked securely in place, preventing its removal until it is unlocked. Comes complete with two keys and six mounting screws. Dimensions: 205mm x 155mm x 80mm.
Carasafe Mini gives you more room for those valuables such as cameras, iphones as well as your travel documents. Dimensions: 200mm x 170mm x 150mm.
Carasafe Premier electronic safe, operates by keypad controls eliminating the risk of a losing the safe key. Dimensions: 230mm x 170mm x 170mm..
The Safe Door lock has a revised lock barrel & key: The new design complements perfectly with the lines of the modern vehicles, the structural ribs introduced reinforce the product making it more functional and reliable. It is easily installed to the vehicle wall with bolts and internal counter brackets.
Available in black, white or grey.
The Safe Door lock has a revised barrel & key: The new design complements perfectly with the lines of the modern vehicles, the structural ribs introduced reinforce the product making it more functional and reliable. It is easily installed to the vehicle on the side frame of the door or garage compartment with self-tapping screws.
Available in black, white or grey
The Safe Door lock has a revised lock barrel & key: The new design complements perfectly with the lines of the modern vehicles, the structural ribs introduced reinforce the product making it more functional and reliable. It is easily installed to the vehicle wall with bolts and internal counter brackets.
This is a kit of 3 locks all complete with the same barrel / key number.
Available in black, white or grey
The Safe Door lock has a revised lock barrel & key: The design complements perfectly with the lines of the modern vehicles, the structural ribs introduced reinforce the product making it more functional and reliable. It is easily installed to the vehicle on the side frame of the door or garage compartment with self-tapping screws.
This is a kit of 3 locks all complete with the same barrel / key number.
Available in black, white or grey
This Safe Door from Fiamma is a restyled, more streamlined version of the standard Safe Door. It also benefits from the "snap-in" positioning system. Fiamma Safe Doors are the ideal solution for additional external locks and offer an excellent anti-theft device.
This Safe Door Frame from Fiamma is a restyled, more streamlined version of the standard Safe Door Frame. It also benefits from the "snap-in" positioning system. Fiamma Safe Doors are the ideal solution for additional external locks and offer an excellent anti-theft device.
This Safe Door Frame can be installed on the aluminium door or the garage with three self-taping screws.
This Spacer Kit can be combined with the Fiamma Safe Door to reduce the gap between a motorhome wall and Safe Door. This version is suitable for Safe Door models from 2017 onwards.
Available in black, white or grey to match the safe door.
Spacer to be combined with Safe Door to reduce the gap between motorhome wall and Safe Door.
Spacer Kit in White.
Safe door lock cover. Black
Safe door plastic inner bolt cover.
Replacement seal as used with Safe Doors.
Pack of three identical key locks and two keys for Fiamma Safe-Door.
Security block created to be placed on the inside of the door or the garage of the motorhome or caravan and to secure the front doors of the vehicle.
