Thetford small burner assy for production date before 17.10.2011
Thetford burner assy for production date after 18.10.2011
Thetford spark electrodes for production before 17.10.2011
Thetford spark electrodes for production after 18.10.2011
Thetford
SSPA0673 600mm 6.3x0.8mm hob thermocouple for aspire, argent and cocina lid shut cookers production date before 17.10.2011
SSPA0672 - 320mm 6.3x0.8mm hob thermocouple for aspire, argent and cocina lid shut cookers production date before 17.10.2011
Thetford 450mm 7.7x0.8mm hob thermocouple for aspire, argent and cocina cookers production date before 17.10.2011
Thetford coaxial hob thermocouple production date after 18.10.2011
SSPA0680 - 250mm
SSPA0681 - 290mm
SSPA0682 - 460mm
Thetford coaxial hob thermocouple for lid shut cookers production date after 18.10.2011
SSPA0686 - 250/680/640mm
SSPA0685 - 290/500/600mm
SSPA0684 - 520/250/600mm
All Heki rooflights are stamped with their size and code to identify them, however the following will also help, and guide you into choosing the correct rooflight.
The length of a window stay is measured between the pivots points when the stay is closed.
A polyfix fitting slides on/off, it detaches by putting a pin or small screwdriver in a hole near the handle.
A screw fitting has screw holes in the backet by the handle.
Adapters are available to allow screw fittings to attach a polyfix stay, these may be supplied with your order.
The 280mm stay in the picture is an auto or click clack stay
The 300mm stay in the picture is a tubular stay
the water through brush is 5ft long when fully extended and comes with four screw connect pipes and a switched tap connector at one end and the through brush head at the other.
Gaffer cloth/tank tape, 48mm wide, 25 metre roll. Choice of Colour.
Euro 1637 brakes
Bearing: 581736. Outer diameter: 60mm, inner: 30mm, length: 37mm
Kit: 641547 - 32mm socket, 50mm flange one shot nut (581200) & hub cap with 55mm diameter and height: 27mm (581197). Older kits use 36mm hub nut, now 32mm is used.
Euro Compact 2051 brakes
Bearing: 605124. Outer diameter: 64mm, inner: 34mm, length: 34mm
Kit: 641549 - 32mm socket, 50mm flange one shot nut (581200) & hub cap with 55mm diameter and height: 27mm (581197). Older kits use 36mm hub nut, now 32mm is used.
Euro 2051 brakes
Bearing: 581169. Outer diameter: 72mm, inner: 39mm, length: 37mm
Kit: 641550 - 32mm socket, 50mm flange one shot nut (581200) & hub cap with 55mm diameter and height: 27mm (581197). Older use 36mm hub nut, now 32mm is used.
Euro 2361 brakes
Bearing: 582226. Outer diameter: 80mm, inner: 42mm, length: 42mm
Kit: 641551- 36mm socket, 59mm flange one shot nut (582506) & hub cap with 65mm diameter and height: 31mm (5582505)
See images for information on common Al-Ko shock absorbers.
"Alhambra" replacement 8ft x 4ft x 2.4mm. Original no longer available, this is the closest replacement.
Order is for TWO wallboards and is collection only from OX17 2EW.
Wallboard Tape Alhambra
2x 25mmx10m Rolls
Alko 48mm jockey wheel with 240mm x 70mm plastic wheel and solid rubber tyre. Max static noseweight 150kg
Height from ground to top of handle: 700mm - 900mm.
Alko jockey wheel 48mm diameter shaft, 215 x 56mm soft wheel with soft rubber tyre. OE replacement for caravans. Max static noseweight 150 kg.