Fixing kit for CCG 2160 and CCG 2161 Morco Primo water heaters. It contains a 15mm gas isolation valve.
The Galvanised 90mm diameter Universal Water Heater Flue Kit for Bosch 1359 and Morco D-61 LPG water heaters. It is also suitable for many Paloma, Valliant MAG 123, Rinnai, Saunier Duval and Chaffoteaux water heaters.
The Flue Kit includes flue terminal, inner flue pipe, roof flange and collar adaptor.
Universal water heater flue kit suitable for use with Morco, Paloma, Vaillant, Rinnai, Saunier Duval & Others.
In line filter for installation within the vehicle for filtered water.
Malaga 750 watt heating element for Malaga water heater. 230V.
Propex flue terminal complete for Malaga E water heater.
Truma Ultrastore Rapid water tank for Series 4 year of manufacture 05/2014 onwards. Accommodates 1300 watt element with 4 bolt fixing. 10 litre capacity.
Truma Therme TT2 replacement tank kit, comes with 3 O rings and 2 drain valves. This is a new tank and tank jacket, all other parts need to be removed from your existing unit. For a complete new unit see part no. CCG 2137 in Appliances section.
Truma Therme TT2 replacement electric heating element, 230V 300 Watt.
Universal exterior water heater cowl over that fits both Truma Ultrastore and Rapide GE
Fits both old and new version.
Truma adapter plate which allows you to replace a Carver Cascade 2 water heater with a Truma Ultrastore water heater, without the need to modify the bodywork of caravan / motorhome.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Carver Cascade 2 water heater drain plug, pre 1987 - Cross slot head
Carver Cascade 2 water heater drain plug after 1987 - Single slot head
Carver drain plug, metric complete with 'O' ring. Identified by slot on top. Generally used on post 1987 models.
Truma Ultrastore series 3 heating element, 230 V / 850 W used from 07/03.
Before 12/14 Replaces: 70010-03000
Replacement electrical connection pins for Carver / Truma Crystal 2 housing (CCG 2720). Price per pair.
Filtapac direct replacement for the Carver Crystal 2 water filter housing. Colour White or Ivory.
CCW 4010 filter required.
Truma Ultraflow compact housing, can be used as an additional inlet either as an external or internal fitment, can also be set up to be used for an external shower. For blanking plug see our Part No. CCG 27252. Colour White.
Truma Ultraflow filter housing complete with one filter. The water pump (see Part No. CCW 3025 - not included) transports water from the external water container through an active carbon filter to the caravan's/motorhome's water supply. Colour of external lid - Grey.
Truma Ultraflow filter housing complete with one filter. The water pump (see Part No. CCW 3025 - not included) transports water from the external water container through an active carbon filter to the caravan's/motorhome's water supply. Colour of external lid - White.
Truma Ultraflow filter housing conversion kit suitable for converting from Crystal water systems. Kit contains 1 Ultraflow Filter Housing, 1 Ultraflow Filter Block, 1 Blind Cover, 1 Pistol Grip, 1 Pair of Spade Terminals, 1 Set of Screws and full instructions. Replaces Crystal 2 Housing without cutting bodywork and utilises your existing pump and hose. Can be easily adapted for external shower point by fitting a bridge connector. Colour White.
