Fixing kit for CCG 2160 and CCG 2161 Morco Primo water heaters. It contains a 15mm gas isolation valve.
The Galvanised 90mm diameter Universal Water Heater Flue Kit for Bosch 1359 and Morco D-61 LPG water heaters. It is also suitable for many Paloma, Valliant MAG 123, Rinnai, Saunier Duval and Chaffoteaux water heaters.
The Flue Kit includes flue terminal, inner flue pipe, roof flange and collar adaptor.
Universal water heater flue kit suitable for use with Morco, Paloma, Vaillant, Rinnai, Saunier Duval & Others.
In line filter for installation within the vehicle for filtered water.
Malaga 750 watt heating element for Malaga water heater. 230V.
Propex flue terminal complete for Malaga E water heater.
Truma Ultrastore Rapid water tank for Series 4 year of manufacture 05/2014 onwards. Accommodates 1300 watt element with 4 bolt fixing. 10 litre capacity.
Truma Therme TT2 replacement tank kit, comes with 3 O rings and 2 drain valves. This is a new tank and tank jacket, all other parts need to be removed from your existing unit. For a complete new unit see part no. CCG 2137 in Appliances section.
Truma Therme TT2 replacement electric heating element, 230V 300 Watt.
Universal exterior water heater cowl over that fits both Truma Ultrastore and Rapide GE
Fits both old and new version.
Truma Ultrastore cowl cover removal tool for easy opening without damage.
Carver Cascade 2 water inlet fitting, with non return valve. This fitting is situated at the bottom of the main body of the carver cascade 2 water heater.
Carver Cascade 2 hot water outlet, situated at the top of the main body of the carver cascade 2 water heater.
Carver Cascade 2 Pressure relief valve, situated in the front of the carver cascade 2 water heater behind the flue cover.
Carver Cascade Rapide wall switch. Colour Beige. Carver Part No. 101761.
Carver Cascade 2 water heater drain plug, pre 1987 - Cross slot head
Carver Cascade 2 water heater drain plug after 1987 - Single slot head
Carver drain plug, metric complete with 'O' ring. Identified by slot on top. Generally used on post 1987 models.
Truma Ultrastore series 3 heating element, 230 V / 850 W used from 07/03.
Before 12/14 Replaces: 70010-03000
Replacement electrical connection pins for Carver / Truma Crystal 2 housing (CCG 2720). Price per pair.
Filtapac direct replacement for the Carver Crystal 2 water filter housing. Colour White or Ivory.
CCW 4010 filter required.
Truma Ultraflow compact housing, can be used as an additional inlet either as an external or internal fitment, can also be set up to be used for an external shower. For blanking plug see our Part No. CCG 27252. Colour White.
Truma Ultraflow filter housing complete with one filter. The water pump (see Part No. CCW 3025 - not included) transports water from the external water container through an active carbon filter to the caravan's/motorhome's water supply. Colour of external lid - Grey.
Truma Ultraflow filter housing complete with one filter. The water pump (see Part No. CCW 3025 - not included) transports water from the external water container through an active carbon filter to the caravan's/motorhome's water supply. Colour of external lid - White.
Truma Ultraflow filter housing conversion kit suitable for converting from Crystal water systems. Kit contains 1 Ultraflow Filter Housing, 1 Ultraflow Filter Block, 1 Blind Cover, 1 Pistol Grip, 1 Pair of Spade Terminals, 1 Set of Screws and full instructions. Replaces Crystal 2 Housing without cutting bodywork and utilises your existing pump and hose. Can be easily adapted for external shower point by fitting a bridge connector. Colour White.
The Ultraflow compact housing conversion kit allows you to effortlessly convert your existing compact housing system whether it be the old Carver crystal system or another brand. Includes 1 x compact housing and 1 x Pistol Connection. Colour White.
Replacement Truma Ultraflow pistol housing complete.
Replacement O rings for Truma Ultraflow Pistol Housing (CCG 2725). Pack of 2.
Truma Ultraflow blanking plug. Use to prevent insects etc. entering the water system during the winter period and when not in use.
Retaining security pegs. Used to retain pump connection in position when in use. Price per pair.
Available in ivory or white
Carver Crystal Mk 2 blanking plug. Use to prevent insects etc. entering the water system during the winter period and when not in use.
Truma hot water outlet fits, C series and Ultrastore water heaters, for use with 12 mm John Guest push in hose fitting.
Truma cold water inlet fits, C series and Ultrastore water heaters, for use with 12 mm John Guest push in hose fitting.
Truma cold water intlet fits C series & Ultrastore, water heaters, for use with 12 mm ID push on hose and clip.
Truma Frost Control current free safety drain valve empties the boiler automatically if there is a risk of frost (at around 3 degrees C) and in the event of excess pressure via a charge nozzle. Only once the ambient temperature has risen to a level where frost is no longer a risk (around 7 degrees C) can the valve be closed by hand and the boiler filled again. Suitable for: Electric boiler, Gas / electric boiler. Push On Barbed Fitting shown. Please see More Info for JG fitting. Select Below.
Hinge pins for Carver / Truma Mk 2 Crystal Housing Lid. Price per pair. Available in ivory or white.
Truma Ultraflow replacement shower lid in white
Lid for Truma Ultraflow Housing (CCG 2723). Colour White.
Lid for Truma Ultraflow Compact housing (CCG 2721) .
Replacement twin water hose for Carver / Truma submersible water pump assemblies. Colour blue.
Tool for the easy removal of the Carver Crystal Mk 2 water filter.
Replacement cap and sealing ring for Truma Ultraflow filter. Colour Blue.
Truma adapter plate which allows you to replace a Carver Crystal Mk 1 water inlet housing with a Truma Ultraflow housing, without modification to bodywork of caravan / motorhome.
1x available
Whale Watermaster inlet socket with integrated pressure switch and microswitch, for use with Whale assemblies CCW 3235 (mains water connection), CCW 3012 (outside water container connection), CCW 5040 (service kit).
Colour: White or Ivory.
Whale socket water outlet. For hassle free was down, easily connect a Whale detachable exterior compact shower. For use with freshwater only.
Overall sixe: W: 103mm, D: 126mm, H: 270mm.
Cutour size: H: 124mm, W: 75mm, D: 126mm
Whale sliding lid compataible with Whale sockets: gas outlet, mains outlet, mains inlet, isolation switch, multimedia and water outlet. Available in white or grey.
Whale socket shower handset. 2.6m hose for use with CCW 10001 water outlet socket. The shower has a one touch trigger and an angled holder.
Whale Easi Slide fresh water inlet is an easy way to supply your vehicle with fresh water, with a slick design to provide a uniform look on the vehicle exterior walls.
Includes socket for exterior submersible pumps, mains water hook up or on-board water pump.
Whale easi slide socket lid replacement in white, for ES6001 exterior water inlet socket. Available in white or silver
Whale IC intelligently controls the submersible pump for trouble free operation and peace of mind meaning you don't need to adjust your pressure switch.
Stops the pump pulsating at high voltages and continuosly running at low voltages.
Detects when water container is empty and turns pump off.
WHALE Socket Motorhome Fill. Directly fill your on-board water tank with the Onboard Tank Fill Socket. The unique secure hose clip keeps the pump in place during filling. The tank fill design incorporates a lock to protect your water supply and a vent pipe to prevent airlocks. The Onboard Tank Fill Socket is suitable for use with any standard hose and should be used with cold freshwater only. Slick design - uniform look on the vehicle's exterior walls. Comfortable to use. Waterproof protection. High quality satin finish. UV stabilised to prevent damage from sunlight.
WHALE Socket Motorhome Fill 12V. Unique 2 in 1 design includes a 12V pump power supply and Onboard Tank Fill all in one socket. The secure hose clip keeps the pump in place during filling. The Onboard Tank Fill + 12v Power Socket incorporates a lock to protect your water supply and a vent pipe ensuring the tank is vented at all times, preventing airlocks. This socket is suitable for use with any standard hose and is to be used with cold freshwater only. Slick design - uniform look on the vehicle's exterior walls. Comfortable to use. Waterproof protection. High quality satin finish UV stabilised to prevent damage from sunlight
Whale sliding socket lid with lock, available in white or grey.
Compatible with SO200C and SO2500C Motorhome fill sockets
Replacement flap / lid for Whale watermaster socket. Available in Ivory, for Whale inlet sockets
Ivory - ES1000 & ES1001
White - ES5001 & UW5000
Whale Watermaster inlet socket without pressure switch, for use with remote pressure switch device or taps with microswitches. Use Whale submersible pump assembly Part No. CCW 3012. Ivory.
Whale Watermaster mains adaptor for Truma Ultraflow socket. Allows you to plug Whale Watermaster mains water connection into a Truma Ultraflow socket.
Whale water our sliding socket lid complete with lock, compatible with SO2000C Motorhome fill and SO2500C Motorhome fill with socket units. Available in white or grey.
Whale Aquasmart inlet socket, for use with Whale Aquasmart Pump, Part No. CCW 3057.
Whale Watermaster 'O' Rings. Pack of 2.
Flow Valve assembly for use in Water Hog and AquaCaddy, it enables a constant supply of Fresh Water to the Water container via a hose connection to mains water tap. The Float opens & close similar to a household toilet cistern.
Replacement large screw cap for the top of the 51 litre Water Hog container.
Tap for 29 litre and 40 litre Aquaroll with cap size of 80mm. Enables your Aquaroll to be used on its side as a barrel. Ideal for tents and awnings.
Replacement Wastemaster and Aquaroll 80mm screw cap, for 29 litre and 40 litre Aquaroll and Wastemaster containers.
Replacement float valve for use on Aquaroll, Aquarius and Roly Poly water carriers.
Aquaroll replacement handle for 29 litre or 40 litre Aquaroll.
Pack of 2 Aquaroll replacement end sockets, into which the handle fixes.
Shurflo barbed hose connectors for Shurflo pumps. One of each elbow and straight connector supplied.
Replacement cap to fit waste water container CCW 1050. 63mm diameter.
Fresh water sticker printed with UV stabilised ink to prevent premature fading. Indicates water filling tank on motorhomes and caravans. Size 60mm x 55mm.
Reich 25mm ceramic cartrdige. As used in Reich Style, Twist. Samba, Cascade B, Vectors S, Concept S and Trend S taps.
Dimatec replacement tap cartridge with monolever operation.
Suits Swift Caravans.
Dimatec replacement tap cartridge with monolever operation.
Suits Bailey, Explorer and Avondale Caravans.
Portland water cap with push fit connection for water hose. Used as a replacement onboard water tank replacement cap to enable easy refil of the water tanks.
Fits smaller water inlets. Cap diameter: 66mm
Rheinland water cap with push fit connection for water hose. Used as a replacement onboard water tank replacement cap to enable easy refil of the water tanks.
Fits most motorhomes, not suitable for Fiamma inlets. Cap diameter: 80mm
Whale pressure switch is recommended for use with Whale submersible and in line pumps when using non-microswitched taps. It fits in line and switches the pump on/off by detecting the change in pressure in the water system. Adjustable cut in/cut out pressure. Prevents the pump cycling on and off.
Replacement Whale On/Off nozzle for Whale taps CCW 3100 Tuckaway Faucet and CCW 3102 Telescopic Faucet. Colour Brown.
WHALE Original Replacement Part Motor Assembly Space Heater 4.2kw
Replacement pair of tap knobs with spindles for Whale Elegance taps/shower. Colour white. Blue/Red bands not included.
Paid of Whale elegance tap & shower range knob upgrade kit.
Suitable for the following Elegance taps: RT1010, RT2010, RT2007, RT2500, RT1500, RT2525, RT2658 & RT2662
Replacement short spout for Whale Elegance tap. Push fit. Colour White.
Replacement long spout for Whale Elegance tap. Push fit. Colour White.
Replacement handset for Whale Elegance Shower / Mixer Tap combination unit. Screw fit. Colour White.
Plug set for Comet exterior water inlet (as shown in photo). Inlet housing not included.
Replacement spout for the Comet Novo tap. Push fit. Colour Beige.
Replacement elbow with washer for Comet Novo tap.
Replacement tee piece with washers for Comet Novo tap.
Caraflo SP200 12mm push end nylon hot and cold tap tails with brass ends that accept standard 12mm push fit connections used with caravan plastic pipework. Length: 345mm.
Caraflo SP210 hot and cold tap tails with ridged brass conical ends for connection to standard 12mm caravan plastic pipework (secured with a jubilee clip). Length: 220mm
Caraflo SP220 hot and cold tap tap tails with push fit ends for easy connection to standard 12mm semi rigid caravan plastic pipework. John Guest type fitting Length: 355mm.
Caraflo SP230 hot and cold tap tails with push fit ends for easy connection to standard 15mm domestic copper or plastic pipework.
Legth: 355mm.
Replacement twin water hose for Whale submersible water pump assemblies. Colour blue.
Replacement hose assembly for Whale Elegance Shower Tap. Colour White. Choose from 1.5m or 2.1m.
Whale replacement shower hose connectors for Elegance taps. Colour White.
Truma Ultraflow Outdoor Shower complete with connecting bridge is designed for the Truma Ultraflow Filter Housing but only for pressurised systems. The pistol grip of the outdoor shower is plugged into the filter housing and the outdoor shower is then ready for use. The Truma Ultraflow Outdoor Shower comes complete with 2.5 metres of hose. Colour White.
Replacement bridge connector for use with Truma Ultraflow Outdoor Shower and Truma Ultraflow housing.
WHALE Watermaster Mains Water Connection. The easy way to connect to mains water – simply hook up for a constant water supply without carrying heavy containers or draining your battery. Now fits both WHALE and Truma Sockets on UK vans. Suitable for use with caravans and motorhomes with either microswitch or pressure switch systems. Regulates mains water pressure to nominal 1.5 bar (max. 1.8 bar).
Truma Ultraflow Waterline is a 15 metre 'food quality' hose pipe to connect the Ultraflow water system directly to a mains water supply. Complete with fittings and a special pressure reducing valve. No additional installation required. Truma Ultraflow Waterline is a simple turn on - turn off system giving a constant water supply. Compatible with the Ultraflow filter and Ultraflow compact water systems, simply by being plugged into the Ultraflow housing.
Whale non return valve, fits inside 1/2in water pipe, helps to ensure consistent prime, useful with electric pumps. White plastic.
Whale non-restrictive, non return valve, designed to fit in line 12mm push fit pipework. It connects directly into the pipework without any additional tubing. Simple installation- incorporates the unique double gripper design that provides secure lifelong pipework.
Truma John Guest, non return valve, to suit 12mm semi rigid tube, allows water to flow only one way.
Truma Ultraflow non return valve with John Guest 12mm fittings.
Truma safety drain valve, for 12mm semi rigid pipe system with John Guest push on fittings, often used with Truma Ultrastore, Combi 2, 2e, 4, 4e, 6 & 6e water heaters.
Truma safety drain valve, for 12mm push on pipe.
Fiamma locking water cap which complies with European standard closure system. Overall diameter - external 112mm - internal 80mm. Available in white or black. Select Below.
Complete tank filler assembly complete with cap, barrel & keys, for use with 40mm convoluted hose.
Available in white or black. Replacement caps available as CCW 3343
Replacement filler vented cap, with barrel and keys for CCW 3342. Available in white or black.
White water inlet for motorhome & Campervan inboard tanks, complete with barrel and keys for use with 40mm convoluted hose.
7/8" Rubber sink plug suitable for 3/4" sink waste.
1 1/2" Rubber sink plug suitable for 1 1/4" sink waste.
Replacement microswitch kit for Whale Elegance taps. Consists of 2 microswitches, 2 clips and 4 connectors.
Replacement microswitch kit for Whale Elite taps. Consists of 2 microswitches and instructions.
Whale watermaster socket microswitch
One replacement microswitch for Comet taps Part No. CCW 3130 and CCW 3132.
Whale baby foot pump Mk2 service kit includes 1x neoprene diaphragm, 1x spring, 4x O rings, 2x fixing screws.
Whale Tiptoe Pump Mk 2 - 4 service kit.
Whale Hand Operated V Pump Mk5 and Mk6 service kit.
Whale universal pump strainer for 15mm push fit pipe.
Whale Smartflo pump strainer for 12mm push fit pipes.
Whale Watermaster service kit. Suitbale for Watermaster socket assemblies ES1000, ES1001 & ES5001
Whale Elegance tap and shower service kit.
Whale replacement Cap and Gasket for Watermaster Dual Connector. Whale Part No. AS8839.
Whale plug and gasket assembly for Superfil 12v assembly.
Whale spare gasket for GP1332 Superfil 12v assembly.
Whale socket and gasket assembly for GP1332 Whale Superfil 80.
Whale aquasource extension 7.5m lay flat hose.
Whale Carver adaptor for Aquasource mains water kit.
Whale 1/2" chrome on brass non-return valve. Suitable for 1/2" hose connections and is designed to be placed in the waterline pipe work and prevents water from returning in the opposite direction, and maintain the primein the water system.
Thetford replacement cap for Model 22 toilet. Chose below small cap 50mm diameter or large cap 90mm diameter.
3m Whale water heater extension cable
Control panel harness for Whale gas & electric water heaters
Pressure relief drain valve for Whale 8/13 litre gas and electric water heaters.
Whale replacement burner assembly for 8 litre water heaters.
Whale replacement burner assembly for 13 litre water heaters.
Whale 8 litre water heater temperature sensor
Whale 13 litre water heater temperature sensor
Whale 8 litre water heater temperature sensor
Whale 13 litre water heater temperature sensor
Whale overheat thermostat for 13 litre gas water heaters.
Whale overheat thermostat for 13 litre gas water heaters.
Whale 8 / 13 litre water heater white flue cover
Whale control panel for gas and eletric water heaters
Whale gas only water heater control panel and loom.
Whale spark electrode assembley for 8 litre and WH1312 water heaters. 220mm long.
Whale spark electrode assembley for 13 litre water heaters. 330mm long.
Whale 1.2kw electrical heater element for 13 litre water heaters.
Whale 1.5kw electrical heater element for 8 litre water heaters.
Whale water heater Zigbee PCB
Whale water heater control panel
Whale I VAN control panel for Elddis 2017
Whale space / water heater main PCB
Whale water heater communication PCB
Whale 8 litre water heater communication board / PCB
25mm diameter replacement cartridge for Roma, Parma, Sienna, Kompakt, Ducale and Stilo taps.
35mm diameter replacement cartridge for Comet Florenz, Capri and Modena taps.
Spare microswitch for Roma / Florenze / Ducale
Micro-switch comes with 400mm cable.
Suitable for use with Florenz, Ducale, Dauphin, Roma, Parma, Sienna, Kompakt, Capri and Modena taps.
Comet red and blue 1/2" barbed tail 45° connectors
An attractive high quality shower head from Comet. With lime scale resistant jets. Chrome finish.
An attractive high quality shower head from Comet with a turntable jet. Chrome finish. Fitted by Swift.
An attractive high quality shower head from Comet with lime scale resistant jets. Chrome finish. Fitted by Coachman.
Thetford Model 4 gas and water tank door frame. Incorporates double seal to help waterproof locks and assist insulation. Integrated hinges and come with white GRP infill.
To suit wall thickness 24mm to 40mm and aperture size 630mm x 330mm. Overall dimensions 700mm x 395mm.
Flue kit for Forcali water heater. Available for 6 Litre and 10 Litre models. Select below.
Pair of Reich 1/2" screw on adaptors
A pair of hot and cold Reich 1000m flexible hose connectors,complete with O ring,which can be easily interchanged on Reich taps to allow freedom of connection to a wide variety of water systems.
Reich 300mm red and blue (27mm) flexible tail connectors with special slim fittings for 27mm base taps
Reich 45 degree base angle in chrome, for Twist taps. Comes with O-ring
Reich replacement 28mm ceramic cartridge, will replacement any twp with 18mm insert. Fits Twist 39mm tap
Replacement ceramic cartridge suitable for caravan or motorhome taps which have an insert of 35mm diameter, such as Reich Kama, Pelikan, Trend E, Charisma and Star Mixer taps.
58mm long.
Reich external shower point with Charisma shower head and pre-mixer valve.
Reich red and blue indicators for Kama taps.
Suitable for replacement shower head on the following Reich styles: Mono Mix 2005, Ceramic Kama , Ceramic Twist and Ceramic Style.
Available in Chrome or Satin Matt/Nickel
640-048000
Reich Charisma replacement microswitch
Reich Deluxe replacement microswitch
Reich Kama replacement microswitch
Reich Keramix replacement microswitch
Reich Mono 2005 replacement microswitch
Reich Pelikan replacement microswitch
.jpg "Reich Microswitch - Trend S")
Reich Trend S replacement microswitch
Reich Twist replacement microswitch
These ridged Reich hose tap connectors, come complete with O ring and can be easily interchanged on Reich taps to allow freedom of connection to a wide variety of water systems.
These ridged Reich hose tap connectors, come complete with O ring and can be easily interchanged on Reich taps to allow freedom of connection to a wide variety of water systems.
Replacement Reich Duett shower head
Replacement Reich Julia shower head. Complete with microswitch and supplied in chrome finish. Can be used as a normal tap or shower tap.
Please note: Shower hose not included.
Replacement Reich Julia shower head
Replacement Reich Kombi shower head
Replacement Reich Orion shower head.
Reich Charisma lever operated shower head. Chrome finish.
To fit Reich Samba or Carino taps
This Reich Konus shower bracket is particularly suited for the Julia and/or Duett shower heads. (Wall fitting)
Reich universal shower bracket. This chrome finish wall bracket fits most shower heads and is suitable for holding shower heads.
Reich wall connection elbow bracket for shower heads with 300mm hose and 1/2" connections.
Reich chrome 1.5m shower hose with 1/2" connection and 3/8" connection.
Reich chrome 1.5m shower hose with 1/2" conections
Reich replacement Trend showerhead
Replacement spout for Reich Trend taps.
Reich Twist red and bllue indicators
Reich 90 degree base angle suitable for Twist taps, comes complete with o-ring.
For 10 litre pumps
