Alko

• Suitable for use as a replacement for AL-KO AK301

Integral security lock and keys which is suitable for many pressed steel couplings. The lock prevents the coupling handle from being operated. Two keys provided.

Al-Ko Stabiliser head M12 bolt 75mm long.

Torx T55 head

Alko rubber bush for the rear of a 150V or 200V damper.

This fits on the treaded end between two metal washers.

Thickness: 5mm, Centre hole: 10mm, Diamter: 21mm

Alko safety breakaway cable with snap hook one end and crimp hook on the other, protective plastic coating, fits all ALKO couplings. It is a LEGAL requirement to have a breakaway cable fitted when towing within the EU

Universal rubber bellows/gaiters for trailer and caravan couplings with 5 folds.
60mm diameter, 120mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied

Fits all Maypole pressed steel couplings up to 3000kg. Soft dock is easy to fit, push it over the coupling head. Soft rubber finish. Effective protection against dents or scratches to the rear of the tow vehicle.

Rubber Vented bellows with bolt cover for ALKO 161S / 251S couplings
54/49mm diameter, 125mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied

Replacement gaiter for Alko AKS 2004 and 3004 stabilisers. 

Alko gaiter to suit most Al-ko couplings fitted with a AKS 2004 or AKS 3004 stabiliser. 
35mm-60mm draw tube, 80mm long, 35mm round opening on the head end, 55mm opening on the other end.

Alko gaiter suit 161S and 251S Alko couplings, All ALKO parts are available please ask.

The Alko Soft Dock is a manufactured from a soft and absorbent rubber compound which makes this coupling cover a great asset to shin protection whilst also reducing the risk of scratches to the towing vehicle. Can be used on ALKO coupling heads AK7, AK10/2 and AK252.

These bellows fit most Al-ko 30s, 60s 90s,120s/SR, 250s and 101VB couplings .
35mm draw tube, approx 100mm long, 30mm round opening on the head end, 40mm opening on the other end.

May fit other couplings.

Rubber Vented bellows without bolt cover for ALKO AKS 2004/3004 couplings
35/55mm diameter, 80mm length
Adds protection to the drawtube by helping to prevent dust and dirt getting into the grease and bearing area. These bellows are vented to allow air and water to be forced out on compression when the brakes are applied

• Suitable for use as a replacement for:
  • Knott KQ7K
  • AL-KO AK7D
  • Ifor Williams PO0355
  • Maypole unbraked trailers with 50mm drawbar

• Suitable for use as a replacement for:
  • Knott KQ7KL
  • AL-KO AK7E
  • Maypole trailers with 60mm Drawbar

• Suitable for use as a replacement for:
  • Knott KQ7K,
  • AL-KO AK7D,
  • Ifor Williams PO0355,
  • Maypole unbraked trailers with 50mm drawbar

Coupling damper suitable for ALKO 60/90. Quality dampers from German manufacturer Stabilus.

See more info for dimensions.

Coupling damper suitable for ALKO 161 Long (post 1998) . Quality dampers from German manufacturer Stabilus.

See more info for dimensions.

Alko nylon bearing bushes, for 161/s  and 251/s coupling, the kit containes 1 - front  bearing and 1 - rear bearing.

• Suitable for use as a replacement for:
  • AL-KO AK160A

• Suitable for use as a replacement for:
  • AL-KO AK160B

Coupling damper suitable for ALKO 161 Short (pre 1998) . Quality dampers from German manufacturer Stabilus.

See more info for dimensions.

Coupling damper suitable for ALKO 251 Short. Quality dampers from German manufacturer Stabilus.

See more info for dimensions.