In order to best ascertain the corner steady required we need measurements matching A, B, C, D , E, F as shown in main diagram. Or an image of your Al-Ko axle plate for us to cofirm with them.
Further images show where part numbers are stamped on steadies.
ALKO replacement 20 mm leg nut, fits CSL 0173 / 4 / 5 leg shown above, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering. Many more Alko spares available.
ALKO replacement leg nut 16 mm, fits older type legs, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering.
Al-Ko corner steady mounting rail used to moun corner steadies to caravan, motorhome or trailer.
A galvanised steel channel with L-shaped bracket for the spindle.
Winterhoff Corner Steady CW4430 - ADS460V
End of threaded bar to T Bar Hole Centres = 567mm
Unpainted channel brace legs double stay 200mm, leg inward opening.
Unpainted or Galvanised channel brace legs double stay 200mm, leg inward opening.
Galvanised channel brace legs double stay 200mm, leg inward opening.
Unpainted channel brace legs double stay 200mm, leg inward opening.
ALKO caravan corner steady, with swivel foot, secured by 3 bolts, fully galvanised. 205.712. See More Info.
Note:(this is not a spigot type leg)
Galvanised caravan corner steady MF 1500. See More Info.
ALKO corner mounted support leg, these legs are available as left hand or right hand, complete with swivel foot 75x130mm, fully galvanised. 205.713 L/H and 205.714 R/H. See More Info.
Left hand shown. 5% discount if a pair is chosen.
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
ALKO Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 40mm. See More Info. for sizes. Many more Alko spares available. 205.808
ALKO 20" caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 65mm. 205.817. See More Info. for sizes.
Can be replaced with CSL 0176 for front fitment, only suitable for rear fitment id the length of the spindle is 605mm or longer.
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. See More Info.
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with LONG spigot mount into tube on chassis, fully galvanised. See More Info. for sizes. These legs were used for a short period and have a spigot length of 85mm. 1211329.
Typically used on Lunar Caravans and Motorhomes,
ALKO Stabliform Caravan corner steady leg, 2 bolt fixing with 40 mm spigot mount into tube on chassis, fully galvanised. This corner steady is the replacement leg for the now obsolete 267 342 leg often fitted to Bailey, Tabbert and Hobby caravans manufactured in Germany. 20582110. See More Info.
ALKO Premium heavy duty corner steady, these are reinforced to support 1250 kg, used on heavier trailers and caravans.
This model is pre punched to receive anti theft device 1222515
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, zinc plated mild steel - 205675
Alko Corner Steady - Short 1000kg, 121139 (Swift), Leg Length 515mm
600Kg heavy duty telescopic trailer jack used for assisting the safe and easy lifting of your trailer with top handle that winds from 475mm - 800mm
800Kg heavy duty telescopic trailer jack plays a crucial part in assisting the safe and easy lifting of a trailer with side handle that winds from 550mm - 900mm
MP4395 1000Kg 350-500mm swivel jack for assisting safe and easy lifting of trailers with handle above foot that winds from 350mm - 500mm