In order to best ascertain the corner steady required we need measurements matching A, B, C, D , E, F as shown in main diagram.
Further images show where part numbers are stamped on steadies.
ALKO replacement 20 mm leg nut, fits CSL 0173 / 4 / 5 leg shown above, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering. Many more Alko spares available.
ALKO replacement leg nut 16 mm, fits older type legs, cast aluminium, supplied with location screws and washers. Check thread diameter before ordering.
BPW Corner Steady 02.3708.42.00
Winterhoff Corner Steady CW4430 - ADS460V
End of threaded bar to T Bar Hole Centres = 567mm
Unpainted channel brace legs double stay 200mm, leg inward opening.
Unpainted or Galvanised channel brace legs double stay 200mm, leg inward opening.
Galvanised channel brace legs double stay 200mm, leg inward opening.
Unpainted channel brace legs double stay 200mm, leg inward opening.
ALKO caravan corner steady, with swivel foot, secured by 3 bolts, fully galvanised. 205.712. See More Info.
Note:(this is not a spigot type leg)
Galvanised caravan corner steady MF 1500. See More Info.
ALKO corner mounted support leg, these legs are available as left hand or right hand, complete with swivel foot 75x130mm, fully galvanised. 205.713 L/H and 205.714 R/H. See More Info.
Left hand shown. 5% discount if a pair is chosen.
Al-Ko standard corner steady with load bearing capcaity of 800kg.
Standard Corner steady compact 800kg long as used on most Bailey vehicles
ALKO Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 40mm. See More Info. for sizes. Many more Alko spares available. 205.808
ALKO Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. Spigot Length 65mm. 205.817. See More Info. for sizes.
Can be replaced with CSL 0176 for front fitment, only suitable for rear fitment id the length of the spindle is 605mm or longer.
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, fully galvanised. See More Info. for sizes. Spigot length 50 mm. 267.265
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with LONG spigot mount into tube on chassis, fully galvanised. See More Info. for sizes. These legs were used for a short period and have a spigot length of 85mm. 1211329.
Typically used on Lunar Caravans and Motorhomes,
ALKO Stabliform Caravan corner steady leg, 2 bolt fixing with 40 mm spigot mount into tube on chassis, fully galvanised. This corner steady is the replacement leg for the now obsolete 267 342 leg often fitted to Bailey, Tabbert and Hobby caravans manufactured in Germany. 20582110. See More Info.
ALKO Premium heavy duty corner steady, these are reinforced to support 1250 kg, used on heavier trailers and caravans.
This model is pre punched to receive anti theft device 1222515
ALKO Stabliform Caravan corner support leg, 2 bolt fixing with spigot mount into tube on chassis, zinc plated mild steel - 205675
Alko Corner Steady - Short 1000kg, 121139 (Swift), Leg Length 515mm
600Kg heavy duty telescopic trailer jack used for assisting the safe and easy lifting of your trailer with top handle that winds from 475mm - 800mm
800Kg heavy duty telescopic trailer jack plays a crucial part in assisting the safe and easy lifting of a trailer with side handle that winds from 550mm - 900mm
MP4395 1000Kg 350-500mm swivel jack for assisting safe and easy lifting of trailers with handle above foot that winds from 350mm - 500mm
MP9785 1265kg 360-760mm heavy duty side wind telescopic swivel jack used for assisting the safe and easy lifting of your trailer with side handle that winds from 360mm - 760mm.
MP4397 Mounting Plate For MP4395/9785
ALKO leg brace, 665mm overall length, for raising and lowering corner steadies, with rotating knob and hand grip, fits all legs with 19 mm AF head. Many more Alko spares available.
Leg brace, for raising and lowering corner steadies, fits all legs with 19 mm AF head. Economy galvanised brace.
Side winding jack leg. See more info for details.
Side winding jacking leg. See more info for details.
Side winding jack leg. See more info for details.
Side winding jack leg. See more info for details.
Pivoting steady leg, can be set in 6 different positions from horizontal to vertical to horizontal. Has a load capacity of 500kg, swivel foot pad and is operated by a standard 19mm leg brace. Ideal when a leg needs to be tucked out of the way when not in use. Has a flat mounting bracket with 2 x 10mm holes.
Pivoting steady leg, can be set in 6 different positions from horizontal to vertical to horizontal. Has a load capacity of 500kg, swivel foot pad and is operated by a standard 19mm leg brace. Ideal when a leg needs to be tucked out of the way when not in use. Has a flat mounting bracket with 2 x 10mm holes.
Pair of replacement handles for Alko steady legs 1224068 and 1224069.
Alko Big Foot with its large,re-inforced landing area prevents the steady legs from sliding away or sinking and provides a firm, safe base for the caravan. The support foot has a maximum load bearing capacity of 1250 Kg. A slot ensures that on progressive contact with the ground, the Alko Big Foot functions independently by adapting to the lie of the land. During driving the Alko Big Foot locks against the corner steady by means of a retaining spring. It may be fitted to Standard stable-form and Premium Alko corner steadies from 2001 onwards. Earlier models need modification - details enclosed in operating instructions. Pack of 4.
Alko Big Foot adapter enables the Alko Big Foot to get 45mm closer to the ground.
Carafoot corner steady leg pads. Set of four with pins.
19mm extension socket for use with cordless drills, for lowering or raising corner steadies. Manufactured from rust resistant zinc plated steel. 300 mm long.
19mm extension socket for use with cordless drills, for lowering or raising corner steadies. Manufactured from rust resistant zinc plated steel. 450 mm long.
19mm extension socket for use with cordless drills, for lowering or raising corner steadies. Manufactured from rust resistant zinc plated steel. 550 mm long.
SAS Corner Steady Leg Lock has insurance approval as they prevent access to the caravan steady winders. By locking down the corner steady legs in the down position they prevent thieves towing your caravan away unlawfully. Both front and/or rear legs can be secured on the same key number! Hand tools cannot squash these locks because of their thick heavy duty steel construction. The inner sleeve tightens onto the hex nut, followed by the outer sleeve locking over, giving double locking security. There is an additional locking key to fix to your corner steady winder, giving the two security measures against thieves. 1 Lock. See More Info.
SAS Corner Steady Leg Locks have insurance approval as they prevent access to the caravan steady winders. By locking down the corner steady legs in the down position they prevent thieves towing your caravan away unlawfully. Both front and/or rear legs can be secured on the same key number! Hand tools cannot squash these locks because of their thick heavy duty steel construction. The inner sleeve tightens onto the hex nut, followed by the outer sleeve locking over, giving double locking security. There is an additional locking key to fix to your corner steady winder, giving the two security measures against thieves. 2 Locks. See More Info.
ALKO Corner steady security locks. These locks prevent the leg from being operated. This kit enables 2 legs to be locked. This lock kit only fits the ALKO Premium legs, our part: CSL 01762 ALKO Premium Corner Steady H/D