Euro pressed steel clamp to suit jockey wheels and legs, this clamp allows removal of jockey wheel or leg without removing clamp. Light duty applications.
Dimensions: Length 105mm, Height 55mm, Bolt holes M10
42mm standard duty split clamp suitable for a 42mm jockey wheels and prop stands.
M10 bolt size, 105mm mounting hole centres, Manufactured from 3.5mm steel, Zinc plate finish
48mm standard duty split clamp suitable for a 48mm jockey wheels and prop stands – see related products
M10 bolt size, 105mm mounting hole centres, Manufactured from 3.5mm steel, Zinc plate finish
48mm serrated heavy duty split clamp suitable for a 48mm serrated jockey wheels and prop stands
Pusher emergency release
Genuine pair of Knott Avonride high quality 350kg suspension units with galvanised bodies. Manufactured from mild steel ,25mm thick forged steel drop arms with rubber suspension inserts,
Standard length 1" stub axles, 6 hole mounting plate ( 76mm between bolts and 79mm across),100mm long drop arm with a angle of 45 degree below centre. Main body length 198mm, overall length of stub axle 100mm, drop arm to rear of hub 25mm
Fits standard 1" tapered hub ( bearing numbers 44643 and 44643L )
Genuine pair of Knott Avonride high quality 750kg suspension units with galvanised bodies. Manufactured from mild steel, 25mm thick forged steel drop arms with rubber suspension inserts,
Standard length 1" stub axles. 8 hole mounting plate ( 73mm between bolts and 100mm across). 100mm long Drop arm with a angle of 22.5 degree below centre. Main body length 303mm. Overall length of stub axle 105mm, drop arm to rear of hub 25mm. Fits standard 1" tapered hub ( bearing numbers 44643 and 44643L )
Genuine pair of Knott Avonride high quality 550kg suspension units with galvanised bodies. Manufactured from mild steel ,25mm thick forged steel arms with rubber suspension inserts.
Standard length 1" stub axles, 6 hole mounting plate ( 76mm between bolts and 79mm across), 76mm long drop arm with a angle of 45 degree below centre. Main body length 198mm, overall length of stub axle 108mm, drop arm to rear of hub 25mm
Fits standard 1" tapered hub ( bearing numbers 44643 and 44643L )
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
Tough black plastic insert, with a multi-gauge serrated base for a tight fit. Select size below.
Unbraked trailer hub, 4 stud on 4 ins PCD, with taper roller bearings, a very popular good quality hub used by most UK manufacturers.
AL-KO pressed steel coupling for unbraked trailers fits onto 50 mm wide draw bar, key lock facility and safety indicator Key insert lock - CSD 3001.
AL-KO pressed steel coupling for unbraked trailers fits onto 60mm wide draw bar, key lock facility and safety indicator. Key insert lock - CSD 3001.
Budget pressed steel coupling for unbraked trailers fits onto 50mm draw bar Max capacity 750 kg has key lock facility. Key insert lock- CSD 3001.
Bradley cast coupling for unbraked trailers has facility for security lock maximun useable capacity 2600 kg and 100 kg nose weight a robust coupling for heavy duty applications. Secuity lock - LOCKIT CSD 3002
Budget pressed steel coupling for unbraked trailers fits onto 60mm draw bar. Suitable for trailers with a maximum capacity of 750 kg. Has key lock facility. Key insert lock- CSD 3001.
Knott unbraked pressed steel coupling suitable for 60mm wide drawbar with comfort fit handle.
Alko pressed steel 50mm coupling on 60mm box section delta plate to enable coupling to be mounted to an 'A' frame drawbar. Galvanised.
Heavy duty snatch cable, a legal requirment on all unbraked trailers. 400 mm long, with safety snap hook on one end and fixed eye the other, this device is intended to keep the trailer and vehicle together should the hitch become detached from the tow ball.
Number plate screw and cap in yellow fornumber plates
2x white, 2x black, 2x yellow
Constructed for standard duty applications, up to 75kg static nose weight, such as small leisure trailers
Height from the ground to the top of the handle is 670mm - 920mm. See more info.
Integral security lock and keys which is suitable for many pressed steel couplings. The lock prevents the coupling handle from being operated. Two keys provided.
Fits all Maypole pressed steel couplings up to 3000kg. Soft dock is easy to fit, push it over the coupling head. Soft rubber finish. Effective protection against dents or scratches to the rear of the tow vehicle.
